User guide

14 Cyclades® CS Console Server Installation, Administration and User Guide
The following table illustrates the information that displays in the upper right corner of all Web
Manager forms.
Logging Into the Web Manager
The following procedure describes the login process to the Web Manager and what should be
expected the first time you login to the console server.
To log into the Web Manager:
1. To display the Web Manager, enter the IP address of the console server in the address field of
your browser.
NOTE: The Cyclades CS console server is usually assigned a static IP address. If DHCP is enabled, you must
find out the dynamically-assigned IP address each time you need to run the Web Manager. If necessary, use the
default static IP address 192.168.160.10 pre-configured in the console server.
a. If DHCP is disabled, use the static IP address assigned by the administrator.
b. If DHCP is enabled, enter the dynamically-assigned IP address. The Login page displays.
2. Log in as
root and type in the root password. The default password is avocent.
CAUTION: It is important to change the root password as soon as possible to avoid security breaches.
reload page Reloads the page.
Help Displays the online help.
next Only appears in Wizard mode. Goes to the next form.
unsaved changes The unsaved changes button appears on the lower right hand corner of the
Web Manager and a graphical LED blinks red whenever the current user
has made any changes and has not yet saved the changes.
no unsaved changes The no unsaved changes button appears and a graphical LED appears in
green when no changes have been made that need to be saved.
Table 3.2: Administrator - Logout Button and Other Information in the Upper Right Corner
Form Area Button and Information Purpose
logout Click this button to log out.
Host Name: Avocent
IP Address: 192.168.48.11
Model: CS4008
Displays the hostname, IP address assigned during initial configuration
and the model number of the Cyclades CS console server.
Table 3.1: Description of Administrator Web Manager Buttons (Continued)
Button name Use and Results