User guide

17
CHAPTER
4
Configuring the Cyclades CS
Console Server in Wizard Mode
After Logging In
When you first log into the Cyclades CS console server, the Web Manager will open the Ports
Status form in Expert mode. To begin using Web Manager Wizard to configure the console server,
click the Wizard button at the lower left corner of the window.
Step 1: Network Settings
Selecting Step 1: Network Settings displays a form for reconfiguring existing network settings.
During initial setup of the console server, the basic network settings required to enable logins were
configured through the Web Manager. Skip this step if the displayed settings are correct.
In Expert mode, under Network menu, you can specify additional networking-related information
and perform other advanced configuration tasks.
If DHCP is disabled, the form appears as shown in the following figure.
Figure 4.1: Wizard - Step 1: Network Settings - DHCP Disabled