User's Manual

Cyclades-PR1000

26Chapter 4 - Step-by-Step Instructions

Parameter Example Your Application

IP fragmentation -

Ignore Bit DF

Yes

NAT Local

ICMP Port Inactive

Incoming Rule List None, filters are not included in this

example.

Outgoing Rule List

Name

None, filters are not included in this

example.

Proxy ARP Inactive

IP Bridge Inactive

FIGURE 4.2 ETHERNET NETWORK PROTOCOL MENU PARAMETERS (CONTINUED)

STEP TWO

No more parameters are necessary for the Ethernet interface. The other interface to be configured is the SWAN.

The SWAN physical media parameters are shown in Figure 4.3. Fill in the values for your application. The SWAN

configuration is described in more detail in chapter 6 of the Installation Manual.

CONFIG=>INTERFACE=>SWAN=>PHYSICAL

Parameter Example Your Application

Mode Asynchronous

Speed 38.4k

FIGURE 4.3 SWAN PHYSICAL MENU PARAMETERS