User's Manual

Cyclades-PR1000

33Chapter 4 - Step-by-Step Instructions

Example 2 A LAN-to-LAN Example Using Frame Relay

This section will guide you through a complete router installation for the connection of two LANs via Frame Relay.

Figure 4.11 shows the example system used in this section. Spaces have been provided next to the parameters

needed for the configuration where you can fill in the parameters for your system. Do this now before continuing.

Central Office's

LAN

200.240.230.2

________

ETH0

SWAN

PR1000

100.130.130.1

________

V.35 DSU/CSU

________

_ _ _ 128 Kbps

Connection

Remote Site’s

LAN

PR1000

200.240.230.1

________

Network IP: 15.0.0.0

_______

Mask :255.255.255.0

________

Network IP: 100.130.130.0

________

Mask: 255.255.255.0

________

Network IP: 200.240.230.0________

Mask :255.255.255.240________

Public

Frame Relay

Network

FIGURE 4.11 CENTRAL OFFICE AND REMOTE SITE CONNECTED USING SWAN INTERFACES