Corporation Installer/User Guide DSR Switch DSR2035, DSR8035

40 DSR2035/8035 Switch Installer/User Guide
The Keyboard dialog box enables you to send a different keyboard country code than the default
US setting. The specified country code is sent to all target devices attached to the DSR2035/8035
switches when they are powered up or rebooted and the new code is stored in the DSRIQ module.
NOTE: If a DSRIQ module is moved to a different target device, the keyboard country code will need to be reset.
See Appendix F for information on emulating certain Sun keys using a PS/2 keyboard and special
considerations for Japanese and Korean Sun USB keyboards.
NOTE: Only local users can view or change keyboard country code settings.
To set the keyboard country code for Sun servers:
1. If the OSCAR interface is not open, press Print Screen to open the Main dialog box.
2. Click Setup - Keyboard to open the Keyboard dialog box.
Figure 3.14: OSCAR Interface Keyboard Dialog Box
3. Select a country code and click OK to save your settings.
4. Reboot the Sun servers. After rebooting, each Sun server will request the country code setting
stored in the DSRIQ module.
NOTE: If you wish to reboot the target devices by power-cycling them, you must wait 90 seconds before
rebooting. A soft reboot may be performed without waiting 90 seconds.