User guide

• Several settings also allow you to enable/disable an Allow users to override these
settings checkbox. When enabled, users may override that profile setting using a Video
Viewer menu command or button. When disabled, users cannot override the setting.
For all profiles other than the default profile, if a setting is configured with
Inherit Default Settings, the Allow users to override these settings checkbox
for that setting will not be available (it will be disabled).
5. To change general settings (see General profile settings on page 291):
a. Click General in the side navigation bar. The General Settings window will open.
b. In the Name field, enter a 1-64 character name. This cannot be the same name as an
existing KVM session profile.
c. In the Default Macro Group field, select the macro group that will appear in the Video
Viewer Macros menu. Enable or disable the Allow users to override this setting
checkbox.
d. In the Keyboard Pass Through Mode field, enable or disable keyboard pass through.
Enable or disable the Allow users to override this setting checkbox. As noted in the
window, in full screen mode, keystrokes are always passed to the target device,
regardless of this setting.
e. In the Menu Activation Keystroke field, select the keystroke that will activate the
Video Viewer menu. Enable or disable the Allow users to override this setting
checkbox.
f. If you changed any settings, click Save.
6. To change cursor settings (see Cursor profile settings on page 293):
a. Click Cursor in the side navigation bar. The Cursor Settings window will open.
b. In the Local Cursor field, if you do not check the Inherit Default Settings checkbox,
enable the radio button for the desired cursor type. Check or uncheck the Allow users
to override this setting checkbox.
c. In the Single Cursor Mode menu, indicate whether the Video Viewer will start up in
single cursor mode. Enable or disable the Allow users to override these settings
checkbox.
d. In the Release Keystroke menu, select the keystroke that will release the Video Viewer
single cursor mode. Enable or disable the Allow users to override these settings
checkbox.
Chapter 19: Using the Video Viewer 297