User guide

6 Integrated LCD KVM Switch Installer/User Guide
Accessing and using the OSD menus (KVM switch)
OSD menus allow you to access and edit server name, setup functions,
autoscan capabilities and firmware upgrades.
NOTE: The two consecutive ScrLk keystrokes should be pressed within two
seconds and the following command key(s) should also be pressed within two
seconds. Otherwise, the hotkey sequence will not be validated.
Figure 1.4: Main OSD Window (8-port Integrated LCD KVM Switch Shown)
The following options will be selectable via the Main OSD window.
Table 1.4: Navigating the OSD Menu (KVM Switch)
To do this: Use this hotkey sequence:
Activate KVM switch OSD
ScrLk + ScrLk + Spacebar
Deactivate KVM switch OSD ESC
(Escape key)
Change Value Left/right arrow keys
Select Item Up/down arrow keys
Table 1.5: Main OSD Menu Functions
Function Description
Select server Use up/down arrow key t
o navigate and
press PgUp/PgDn to scroll page. Press
Enter to select.
Edit server name Pressing I
nsert allows you to change a
server name. Enter confirms the change.