User guide

9
Installation & Configuration
2
Installing
Your
LongView
Test your LongView before permanently installing
your extension cable into a wall or ceiling. The
following instructions apply to both testing and
installation of the unit.
LongView is available in versions with and without
audio capabilities. The following instructions apply
to all versions. Simply ignore instructions to
connect to the audio connectors if your LongView
does not have audio capability.
1. Power down your computer.
2. Place the Transmitter near the computer. Con-
nect the Cybex custom cable (marked CUFC)
to the 25 pin INPUT connector on the rear of
the Transmitter.
3. Unplug the peripherals (keyboard, mouse, moni-
tor, speakers, microphone and serial device if
applicable) from your computer.
+
REMOTE I/O
INPUTSETTINGS
1-------------------------- 8
TRANSMITTER
LOCAL
PATENT PENDING
.5A
24VDC
LongView
Companion
Transmitter
LongView
Transmitter
+
INPUT
TRANSMITTER
PATENT PENDING
.5A
24VDC
REMOTE I/O