User guide

10
4. Connect the CUFC cable’s 15 pin video con-
nector to the video output connector on your PC.
5. If both users are using PS/2 mice, plug the
CUFC cable’s PS/2 mouse connector, desig-
nated by a yellow band or mouse icon, into
your PC’s PS/2 mouse jack.
If both users are connecting serial mice to a
Companion model: Use a standard serial cable
(9 pin male to 9 pin female) to connect the
LongView’s lower (female)
port to your
PC’s COM serial port. Leave the CUFC cable’s
PS/2 mouse connector unattached.
If both users are using serial mice on a stan-
dard LongView unit: Connect the CUFC
cable’s 9-pin mouse connector to the serial
COM port of your PC.
6. Plug the remaining 6-pin connector into the
PS/2 Keyboard jack on your PC.
7. On a standard LongView unit, if you use the se-
rial mouse connector on the Transmitter’s CUFC
cable, do not connect anything to the
Transmitter’s
port. If you use the PS/2
mouse connector you may extend the serial Com
port from the PC to the user for other devices.
If you have a Companion model, and did not
connect a serial mouse to LongView’s serial
port, both users may share your computer’s
serial COM port for other devices. To do this,
connect a standard serial cable from the
LongView’s
port to your PC’s COM se-
rial port.
LongView Installer/User Guide