User guide

13
11. Plug the circular power plug from the provided
wall-mount power supply into the
jack
on the rear of the Transmitter, then plug the
power supply into a convenient electrical out-
let. Verify that the POWER light on the front
of the Transmitter is lit. (You may connect the
LongView wall-mount power supply to the Re-
ceiver instead of the Transmitter, if you wish.)
12. Plug a standard Category 5 Unshielded Twisted
Pair cable (up to 500 feet) into the remote I/O
jack on the rear of the Transmitter. Cybex C5T,
Cybex P5T, Belden 1583A or Belden 1585A
cable is strongly recommended to achieve best
performance and maximum distance. If you use
a different Category 5 cable, make sure it is
terminated to the EIA (TIA) 568 B standard,
commonly used for 10BaseT Ethernet. Do NOT
use a crossover cable. Incorrect termination can
damage the LongView. (see appendix E)
13.Route the Category 5 cable to the location
where you intend to place the remote monitor,
keyboard, mouse and speakers.
LongView
Companion
Receiver
RECEIVER
AUDIO
SERIAL
IN OUT
MSE KBD
VIDEO
REMOTE I/O
24VDC
.5A
Installation & Configuration
Mouse Sense Options
noitcnuF1hctiwS
etavitcanactnemevomesuoM
resua
nwoD
tonnactnemevomesuoM
resuaetavitca
pU