User guide

To add target devices to the Scan list:
1. From the side navigation bar, select Unit View - Target Devices to open the Target Devices
screen.
2. Select the checkboxes next to the names of the target devices you wish to scan.
3. Click Scan.
To configure Scan Time:
1. From the side navigation bar, select Unit View - Appliance - Appliance Settings - Ports -
Local Port UI to open the Local Port UISettings screen.
2. Under the Scan Mode heading, enter an amount of time in seconds (from 3-255) in the
Scan Time field.
3. Click Save.
DSView 3 Server IP Addresses
You can contact and register an unmanaged MergePoint Unity switch with a DSView 3 server
by specifying the IP addresses of up to four DSView 3 servers.
To configure the DSView 3 server IP address:
1. On the side navigation bar, select Unit View - Appliance - Appliance Settings - User
Accounts - DSView. The Appliance DSView Settings screen is displayed.
2. Enter up to four DSView 3 software server IP addresses that you want to contact in the
Server 1 - 4 fields.
3. Click Save.
User Accounts
Managing local accounts
The MergePoint Unity switch OBWI provides local and login security through administrator-
defined user accounts. By selecting Local Accounts on the side navigation bar, administrators
may add and delete users, define user preemption and access levels and change passwords.
Access levels
When a user account is added, the user may be assigned to any of the following access levels:
Appliance administrators, User administrators and Users.
Table 3.6: Allowed Operations by Access Level
32 MergePoint Unity® Switch Installer/User Guide