User guide

To change the Video Viewer window resolution:
1. Select the View - Scaling command.
2. Select the desired resolution.
Adjusting the View
Using menus or task buttons in the Video Viewer window, you can do the following:
• Align the mouse cursors.
• Refresh the screen.
• Enable or disable Full Screen mode. When Full Screen mode is enabled, the image adjusts
to fit the desktop up to a size of 1600 x 1200 or 1680 x 1050 (wide-screen). If the desktop
has a higher resolution, the following occurs:
• The full-screen image is centered in the desktop, and the areas surrounding the Video
Viewer window are black.
• The menu and toolbar are locked so that they are visible at all times.
• Enable automatic, full or manual scaling of the session image:
• With full scaling, the desktop window remains fixed and the device image scales to fit
the window.
• With automatic scaling, the desktop window is sized to match the resolution of the
target device being viewed.
• With manual scaling, a drop-down menu of supported image scaling resolutions is
displayed.
• Change the color depth of the session image.
To align the mouse cursors:
Click the Align Local Cursor button in the Video Viewer window toolbar. The local cursor
should align with the cursor on the remote device.
NOTE: If cursors drift out of alignment, turn off mouse acceleration in the attached device.
To refresh the screen, click the Refresh Image button in the Video Viewer window, or select
View - Refresh from the Video Viewer window menu. The digitized video image is completely
regenerated.
To enable Full Screen mode, click the Maximize button, or select View - Full Screen from the
Video Viewer window menu. The desktop window disappears and only the accessed device
Chapter 4: The Video Viewer 43