User guide

8 SwitchView OSD Installer/User Guide

Connecting Computers to the SwitchView OSD

4. Locate your first expansion cable. There will be one 6-foot cable ending

with three connectors one each end: one 15-pin “HDD ” for your video,

one 6-pin miniDIN connector for a PS/2 keyboard connection, and one

6-pin miniDIN connector for a PS/2 mouse connection.

Choose an available port, labeled A-H, on the rear of your

SwitchView OSD unit. Plug the video expansion cable connector into the

blue port of your chosen channel. Plug the PS/2 keyboard expansion

cable connector into the purple port. Plug the mouse expansion cable

connector into the appropriate green port.

5. Plug the remaining ends of the video, PS/2 keyboard and mouse expan-

sion cables into the matching ports on your computer.

6. Locate your next set of expansion cables. Repeat steps 4 and 5 until all

computers are properly attached to the SwitchView OSD.