Operator`s manual

2. Patching - Page 37

TitanMobile_Man_v4-0.doc 07/04/2011 13:46:00

1> Press Patch.

2> Press [Edit Fixtures]

3> Press [Swap Pan and Tilt].

4> Select the fixtures to be pan-tilt swapped. Press [Pan and Tilt

…] to select either [Swapped] or [Normal] for the selected

fixtures.

5> Press Exit when finished.

2.5.2 Invert attributes

This option inverts individual attributes of fixtures. Useful if you have

a fixture which pans right when the rest pan left, saving a trip up the

rig to set fixture options, but

you can invert any attribute.

1> Press Patch.

2> Press [Edit Fixtures].

3> Press [Invert Attribute]

4> Select fixture(s) to be

changed.

5> Select the attribute to

invert from the

softkeys. The display

shows [Inverted] when

the attribute is inverted.

6> Press Exit to finish.

• You can change the

invert on multiple fixtures by selecting more than one, but the

“Inverted” display will not show if there is a mixture of inverted

and non-inverted fixtures in the selection.

• Some attributes cannot be inverted.

2.5.3 Freeze fixtures or attributes

This option allows you to freeze individual attributes of a fixture, or to

freeze the whole fixture. Attributes or fixtures which are frozen are

not affected by playbacks or by the programmer.

1> Press Patch.

2> Press [Edit Fixtures]

3> Press [Freeze Fixture or Attribute].

4> Select the fixtures to be frozen/unfrozen.

5> Use the softkeys to select which attributes are frozen, or to

freeze the whole fixture. Frozen attributes are indicated on the

softkey..

6> Press Exit when finished.