User Manual
Table Of Contents
- Introduction
- Features
- In The Box
- Specifications
- The Transmitter
- Indicator Troubleshooting Lights - Transmitter
- Functions & Setup of the Transmitter
- Settings Button - Transmitter without Dip Switches
- Test Pattern Button - Transmitter with Dip Switches
- The Receiver
- Indicator Troubleshooting Lights - Receiver
- Settings Button - Receiver
- IR Configuration
- Extracted Audio - L/R OUT
- Audio Extraction Example
- RS-232 Pass-through
- Troubleshooting
- Bandwidth Chart
- Maintenance
- Damage Requiring Service
- Support
- Warranty
14
RS-232 Pass-through
For extending RS-232 communication over the Category
cable. For these to pass a signal, both the Transmitter
and Receiver need to have the Dip Switch set to Normal
Mode, not RS-232 Program.
Default out of the box is MODE NORM (Normal Mode).
RS232 PROG (Program mode for Firmware updating).
Audio Extraction Example