User Manual
Table Of Contents
- Introduction
- Features
- In The Box
- Specifications
- Troubleshooting Lights - Transmitter/Receiver
- Troubleshooting Lights (HDBaseT Port)
- Transmitter Ports
- Receiver Ports
- IR Configuration
- Audio
- EDID Management - Transmitter
- EDID Copy Instructions
- RS-232 Configuration
- Troubleshooting
- Bandwith Chart
- Maintenance
- Damage Requiring Service
- Support
- Warranty
15
Maintenance
To ensure reliable operation of this product as well as protecting the safety of any person using or
handling this device while powered, please observe the following instructions.
·Use the power supplies provided. If an alternate supply is required, check voltage, polarity and
that it has sucient power to supply the device it is connected to.
·Do not operate these products outside the specied temperature and humidity range given in
the above specications.
·Ensure there is adequate ventilation to allow this product to operate eciently.
·Repair of the equipment should only be carried out by qualied professionals as these prod-
ucts contain sensitive components that may be damaged by any mistreatment.
·Only use this product in a dry environment. Do not allow any liquids or harmful chemicals to
come into contact with these products.
·Clean this unit with a soft, dry cloth. Never use alcohol, paint thinner or benzene to clean this
unit.
Damage Requiring Service
The unit should be serviced by qualied service personnel if:
·The DC power supply cord or AC adaptor has been damaged
·Objects or liquids have gotten into the unit
·The unit has been exposed to rain
·The unit does not operate normally or exhibits a marked change in performance
·The unit has been dropped or the housing damaged