Owner`s manual

Disarming

1. Press the bottom button.

2. The indicators will ﬂash and the siren will chirp three times.

3. The doors will unlock (if optional central locking installed).

4. The LED light on the dash will go out. The system is now disarmed.

Alarm trigger zone

1. Disarm the alarm and turn on the ignition.

2. Watch the LED light on the dash and count the number of ﬂashes.

It will only ﬂash the ﬁrst time you turn on the ignition after a trigger.

3. See the table below for zone codes.

If the alarm is triggered while you are away from the vehicle the LED

light on the dash will tell you which zone has been triggered.

Number of ﬂashes Triggered zone

1 Door

2 Bonnet/boot

3 Voltage drop

4 Optional sensor

5 Shock sensor

6 ACC/ignition