Owner`s manual

Panic/car finder
Valet mode
1. Make sure the car ignition is turned off.
2. Press the top button on the remote for two seconds.
3. The indicators will flash and the siren will sound for 30 seconds.
4. To cancel panic, press the top button again.
This mode will stop the alarm arming. It is a useful if your vehicle
is being serviced or repaired. In valet mode only central locking
from the top button (if connected) and boot release from the bottom
button (if connected) of the remote will operate.
TURN VALET MODE ON
1. Disarm the alarm.
2. Turn the ignition on.
3. Push and hold the bottom button on the remote for two seconds.
4. The siren will chirp 10 times to confirm it is in valet mode.
TURN VALET MODE OFF
1. Turn the ignition on.
2. Push and hold the bottom button on the remote for two seconds.
3. The siren will chirp 10 times to confirm valet mode is off.