CAUHF-P18 EASY INSTALL 55 ELEMENTS UHF AERIAL Item ref: 130.
INTRODUCTION: Thank you for choosing Mercury antenna. This strong triple boom antenna is designed to pick up weak TV signals where location is far away from the closest from the TV transmission tower. It is designed to be easily assembled where most parts are secured with wing nuts. Please follow the steps below for assembly. Step 1: Install the extensions on to the main body boom arm with supplied brackets and wing nuts as below.
Step 3: Guide the screw on dipole box through the pre drilled holes on the main body arm, use the wing nut supplied to tighten it in place. Step 4: Slide the reflectors into the housing and screw the housing onto the main body, please ensure the narrower end of the reflector is heading inward and the wider end of the reflector is heading outward.
Step 6: Loosen the mast clamp until the mast pole can fit through it, ensure the tip of the antenna is facing directly towards the signal transmitter you wish to receive on and tighten up the wing nuts until the aerial is securely mounted on the mast pole. Loosen adjustment nuts and adjust the aerial closest to horizontal level and tighten it again to lock it in position. Please note, for best reception.
