Manual

ManualsBrandsAVSL ManualsHardware130.030-130.033 AMD SERIES

AMD SERIES

4G READY AERIAL

DISTRIBUTION AMPLIFIERS

Item ref: 130.030UK, 130.031UK,

130.032UK, 130.033UK

User Manual

CAUTION

Please read through this manual carefully before use. This product is strictly for indoor

use only, please install this product in dry and cool environment and keep out of the

reach of children and pets.

Please do not open cover, contain high voltage. This

product is not serviceable or repairable by end user. Please

return to dealer for repair

Summary of content (4 pages)

PAGE 1
AMD SERIES 4G READY AERIAL DISTRIBUTION AMPLIFIERS Item ref: 130.030UK, 130.031UK, 130.032UK, 130.033UK User Manual CAUTION Please read through this manual carefully before use. This product is strictly for indoor use only, please install this product in dry and cool environment and keep out of the reach of children and pets. Please do not open cover, contain high voltage. This product is not serviceable or repairable by end user.
PAGE 2
INTRODUCTION: Thank you for choosing Mercury AMD series distribution amplifier. It is designed to amplify weak FM/DAB/TV aerial from aerial and distribute to multiple outputs, ideal for domestic or commercial use to distribute FM/DAB/DTV(DVB-T, ATSC, ISDB, T-DMB)/Sat signal to different room/area. PRODUCT FEATURES: Separate dedicated inputs for VHF and UHF signal. Built in low noise high gain amplifier to boost weak signals from aerial. Built in mixer to give wideband VHF and UHF output.
PAGE 3
EXAMPLE INSTALLATION: This diagram shows AMD08 receiving TV signals from the Sat receiver and FM/DAB aerial and distributes signals to 4 individual hi-fi and TV units. AMD series amplifiers are designed with DC pass function. All 4 TV units can be set up with “Magic eye” (remote extension unit) to allow remote control of Sat receiver when TV set is not at the same room as the Sat receiver. This can only be done when connect the RF2 output to the UHF input of the amplifier.
PAGE 4
It is also suitable for upgrading or replacing existing UHF/VHF signal distribution unit, simply reconnect existing connecting from previous unit to the AMD amplifier. Ensure the UHF aerial is connected to the UHF input of the amplifier and FM/DAB aerial connected to the VHF input of the amplifier. For loft distribution installation please ensures the unit is kept away from moisture and heat sources. TVs that are not compatible with digital TV will require a digital set top box for TV viewing.