LED DUOFLOWER Dual Moonflower Effect Item ref: 151.
Introduction Thank you for choosing the QTX LED DUOFLOWER quad colour dual LED flower light as part of your effect lighting rig. Please read these instructions in full to gain the best results from this item and avoid damage through misuse. Unpacking Your LED DUOFLOWER should reach you in good condition and be supplied with appropriate mains lead(s) and mounting bracket. If there are any signs of damage or items missing from the packaging, contact your dealer immediately.
Setting up Install the LED DUOFLOWER so that the front panel is facing the area to be lighted. Experiment with positioning to get the best coverage from the dual mirror apertures. The LED DUOFLOWER can be operated in either DMX or sound activated mode. For sound-activated mode, select 1 unit to be master and connect DMX leads onto slave units. For DMX control, connect the DMX control signal via XLR leads to DMX in and out at the rear. Connect mains using an appropriate IEC lead to the mains inlet.
DMX 1-Channel Mode Channel 1 Internal programmes DMX 8-Channel Mode Channel 1 Channel 5 Head 1: Colour Head 2: Colour Channel Channel Channel Channel Head Head Head Head 2 6 3 7 Channel 4 Channel 8 1: 2: 1: 2: Dimmer Dimmer Strobe Strobe Head 1: Mirror Rotation Head 2: Mirror Rotation Value 000-007 008-037 038-067 068-097 098-127 128-157 158-187 188-217 218-247 248-255 Function Blackout Show 1 Show 2 Show 3 Show 4 Show 5 Show 6 Show 7 Show 8 Sound activated Value 000-007 008-024 025-041 042
