Owner manual

152.763UK User Manual
Control panel options
Display
Mode
Press ENTER for setting (press FUNC to exit)

Auto modes
 (RBP), (blue), (red), (purple)

Sound activated modes
 (RBP), (blue), (red), (purple)

Microphone sensitivity
 (minimum) to (maximum)

DMX start address
 to 

Slave mode
 = direct slave mode (mimics master unit)
 = 0.2s delay… = 1.0s delay

Remote mode
 = handheld IR remote controlled

Laser test
 = produces purple cross for checking image
Stand-alone modes
THE FLY laser can operate in stand-alone mode one of 2 ways: Auto or Sound-activated
Auto mode
 Press the FUNC button and navigate until

is displayed
 Press ENTER and 4 options are available using the UP and DOWN buttons
o

- Steps through all patterns with red, blue and purple colour
o

- Steps through all patterns with blue colour only
o

- Steps through all patterns with red colour only
o

- Steps through all patterns with purple colour only
 Press ENTER to confirm the required mode
Sound-activated mode
 Press the FUNC button and navigate until

is displayed
 Press ENTER and 4 options are available using the UP and DOWN buttons
o

- Sound-activated patterns with red, blue and purple colour
o

- Sound-activated patterns with blue colour only
o

- Sound-activated patterns with red colour only
o

- Sound-activated patterns with purple colour only
 Press ENTER to confirm the required mode