SBF15 LED Strobe/Blinder/Flood Item ref: 153.
Caution: Please read this manual carefully before operating Damage caused by misuse is not covered by the warranty Introduction Thank you for choosing the SBF15 strobe/blinder/flood light as part of your lighting effects rig. Please read these instructions in full to gain the best results from this item and avoid damage to the unit. Unpacking Your SBF15 should reach you in good condition and be supplied with appropriate mains lead(s) and dual mounting bracket.
Setting up If the SBF15 is to be mounted at height, use the integral bracket and fix a safety wire to the eyebolt (7) The SBF15 can be free-standing on the floor or stable surface using the dual bracket as a bipod stand. Position the SBF15 so that the front aperture is facing the area to be lighted. Be careful not to aim the LEDs directly into eyes, as this can cause damage, especially at close range. Experiment with positioning to get the best coverage – the SBF15 provides wide angle light dispersion.
Specifications Power supply LEDs Modes DMX channels Dimensions Weight Laser & LED safety standard 240Vac, 50Hz (IEC) 3 x 5W COB white Chase, Sound strobe, Sound pulse, Flood, DMX 4ch (LED1, LED2, LED3 + Presets) 230 x 80 x 100mm 1.
