WSL-Q7 Wireless RGBW PAR Can Item ref: 154.
Caution: Please read this manual carefully before operating Damage caused by misuse is not covered by the warranty Introduction Thank you for choosing the WSL-Q7 wireless quad colour PAR light as part of your effect lighting setup. This unit has been designed to provide wire-free colour effects for stage shows, special events and architecture. Please read the following instructions for best results.
Setting up Install the WSL-Q7 by the mounting bracket, which can also be configured as a floor stand. Experiment with positioning and distance to get the best coverage for the area to be lighted. For DMX or master/slave control, link DMX out to DMX in using good quality DMX leads. If the WSL-Q7 is to be mains operated, connect to mains using the appropriate IEC lead. Rear panel 1. 2. 3. 4. 5. 6. 7. 8. 9. 10.
Control panel settings Display Mode DMX address Slave mode DMX channel mode Fixture ID setting - Panel lock - RGB limit mode - display dimmer Sound activated RGB preset limit Software version Static colour & strobe Auto program 1-2 Sound activated mode Press ENTER for setting (press FUNC to exit) to = slave mode active , , , , (see appendix) to / (see “Note: Panel Lock
Master/Slave operation From the control panel, the WSL-Q7 can be set to Slave mode () to be controlled by another WSL-Q7 via a DMX link. For instance, setting a WSL-Q7 unit to Auto1 and connecting DMX out to the DMX in of another WSL-Q7 that has been set to Slave mode will make the slave unit mimic the Auto1 program of the first unit. In addition to wired connection, a WSL-Q7 in Slave mode can be controlled wirelessly from another WSL-Q7 via a WDMX. See “Wireless Master/Slave operation” below.
Specifications Mains power Current consumption Fuse rating Rated power Battery Charge time Battery life Mode(s) LEDs LED type Beam angle Connections Carrier frequency Wireless range Dimensions Weight Laser & LED safety standard 100-240Vac, 50-60Hz 0.5A @ 230V F3.15A 60W 12Vdc 10Ah Li-ion rechargeable 5 hours 10hrs 2/3 colours, 3.5-4hrs full colour Auto, sound, master, slave, DMX (wired or wireless) 7 x 8W Quad colour (red, green, blue, white) 25° DMX in, DMX out (XLR), mains (IEC) 2.400 - 2.
Appendix: DMX implementation HSV (3CH) Channel 1 Channel 2 Channel 3 Mode Hue Saturation Value Value 000-255 000-255 000-255 Function Scroll through colours Adjust depth of colour mix Master dimmer 4CH Mode Channel 1 Channel 2 Channel 3 Channel 4 Mode Red Green Blue White Value 000-255 000-255 000-255 000-255 Function Red brightness 0-100% Green brightness 0-100% Blue brightness 0-100% White brightness 0-100% 5CH Mode Channel 1 Channel 2 Channel 3 Channel 4 Channel 5 Mode Dimmer Red Green Blue Whit
CH Mode Channel 1 Channel 2 Channel 3 Channel 4 Channel 5 Channel 6 Mode Dimmer Red Green Blue White Strobe Channel 7 Preset Channel 8 ID address Value 000-255 000-255 000-255 000-255 000-255 000-255 000-015 016-031 032-047 048-063 064-095 096-111 112-127 128-144 145-159 160-175 176-191 192-207 208-223 224-255 000-009 010-019 020-029 030-039 040-049 050-059 060-069 070-079 080-089 090-099 100-109 110-119 120-129 130-139 140-149 150-159 160-169 170-179 180-189 190-199 200-209 210-255 Function Master
