WDMX-2 Wireless DMX Transceiver Item ref: 154.
Caution: Please read this manual carefully before operating Damage caused by misuse is not covered by the warranty Introduction Thank you for choosing the WDMX-2 wireless DMX transceiver as part of your lighting control system. This unit can be used as a transmitter for qtx wireless PAR lights or in pairs for a wireless link between standard DMX512 lighting controllers and fixtures.
Front and Rear Panels 1 2 3 DMX OUT connector XLRF DMX IN connector XLRM Mains inlet IEC + fuse holder 4 5 6 ANTENNA connector mini TNC ID DISPLAY indicator (RGB LED) ID SET button Setting up Install the WDMX-2 where it is most convenient for radio signal between transmitter and receiver. Connect the supplied antenna via the mini TNC connector on the front panel.
Specifications Power supply Frequency band ID settings Connections Dimensions Weight 240Vac 50/60Hz (IEC) 2.