QTFX-LF900 Low Level Fog Machine Item ref: 160.
Introduction Thank you for choosing the QTFX-LF900 low level fog machine as part of your stage effects setup. This machine is designed to emulate low lying dry ice effects using cooled fog fluid. Please read and keep this manual to ensure maximum performance and avoid damage through misuse. Unpacking Your QTFX-LF900 should reach you in good condition and should be supplied with IEC mains lead(s) and a wired handheld remote control.
Layout 1. Carry Handle 2. Top panel lifts up for loading the ice 3. Safety screw to secure top panel 4. Fog output nozzle 5. Fluid bottle (Note: the fluid bottle cannot be removed) Rear panel 1. 2. 3. 4. Remote control connection Power ON/OFF IEC mains inlet and fuse holder Fluid drain tap Remote control / timer control 1. 2. 3. 4. 5. 6. 7.
Operation Switch on the power switch on the rear panel. Heat up time is usually around 4 minutes. Please ensure no button is pressed during the heat up time. When the machine is ready the LED light on the remote control will illuminate Press the Manual Override button on the remote control for 5 seconds so the fluid has a chance to flow through the heater block making it ready to use. After this you will be able to use the machine.
160.
