HZ-3 HAZE MACHINE Order ref: 160.459UK User Manual VERSION 1.
INTRODUCTION: HZ-3 Haze Machine A follow on from the highly successful HZ-2, the new HZ-3 haze machine features a range of upgrades to ensure it remains the top haze machine in its class. A new improved 700W heater ensures all fluid is vaporised quickly as well as decreasing the warm up time. The new easy to operate LED digital display allows for stand-alone operation as an alternative to the timer remote or 2 channel DMX operation. The 1.6l tank is removable and easy to clean.
PACKAGE CONTENTS: Please check the contents to ensure that the product has been received in good condition. HZ-3 Haze Machine x 1pc User’s Guide x 1pc Power Cord x 1pc Remote Control x 1pc If you find any accessory is missing or the machine has arrived with any problems, please contact your local dealer at once. Do not try to fix this item yourself or you will lose the warranty. Please keep the original package and invoice for any possible replacement or returned demand.
SETUP: 1. 2. 3. 4. 5. 6. 7. Unpack the haze machine Unscrew the top cap of the tank and remove to fill with the recommended haze fluid Replace the bottle and screw the cap securely ensuring the pipe is fed down to the bottom of the bottle so a consistent flow of fluid is supplied to the machine Connect the remote control Connect the IEC mains plug and power up Heat up time is usually between 2-3 minutes. Please ensure no button is pressed during the heat up time.
CONNECT WITH POWER SUPPLY – THE GROUND WIRE MUST BE CONNECTED: Use the plug to connect to the main power supply as follows: Wire Connection International signal Brown Live L Blue Neutral N Yellow /Cyan Earth QUICK TROUBLE SHOOTING If the unit is not functioning properly Check if main power is on. Check the fuse hasn’t blown. Check the unit isn’t in DMX mode.
LAYOUT HZ-3: 1. Mounting Handle 2. Carry handle 3. Adjustable output flap 4. Haze nozzle output 5. Removable bottle 6. Thumb screw for mounting bracket 7. Thumb screw for adjustable out put flap. 8. Handheld Remote controller 160.
REAR PANEL HZ-3: 1. Remote connection 2. Power IN (Use IEC lead provided) 3. LED Digital controller (see next section) 4. DMX Out 5. DMX IN 160.
OPERATION FOR HZ-3 When you first turn on the Haze machine it will display “HEAt” for around 2-3 minutes while the unit warms up. When completed you will have access to various options if the wired remote control is not connected Press menu to scroll through the various options listed below. Use the up and down keys to set the secondary function.
TIMER CONTROLLER The timer controller can be used to control the HZ-3 remotely. Please note Fan Speed (FS) and Haze Output (HO) must be set to zero for the remote timer controller to operate. 1. Timer on/off button 2. Continuous output 3. Manual override button 4. Timer LED indicator (Illuminated Yellow when timer active) 5. Manual ready indicator (Illuminates Green when ready) 6. Power indicator (Illuminates red when power is on) 7.
TECHNICAL SPECIFICATION Power supply 230Vac, 50Hz Fuse F5A Power 700W Re-heat time 3 min (approx) Haze Output 2,400 Cu Ft (68m³) per minute Tank capacity 1.6 Litres Dimensions 310 x 330 x 263mm Weight 8kg DISPOSAL: Please disposal of the unserviceable device according to the current statutory requirements. 160.
160.
Errors and omissions excepted. Copyright© 2013. AVSL Group Ltd. 160.
