QTFX-B3 MEGA BUBBLE MACHINE Order ref: 160.
INTRODUCTION: QTFX-B3 MEGA BUBBLE MACHINE Unique to QTX, this lightweight bubble machine features barrel rolling wands which produce an incredible amount of bubbles. It is made from heavy duty ABS plastic and features a high quality low noise fan. Ideal for events, parties and mobile discos. • • • • • • Very high bubble output High speed fan with low noise Made from Lightweight heavy duty plastic Easy fill and empty tank Includes handheld remote For best results use with Qtx bubble fluid 160.
PACKAGE CONTENTS: Please check the contents to ensure that the product has been received in good condition. QTFX B2 bubble machine x 1pcs User’s Guide x 1pcs Power Cord x 1pcs If you find any accessory is missing or the machine has arrived with any problems, please contact your local dealer at once. Do not try to fix this item yourself or you will lose the warranty. Please keep the original package and invoice for any possible replacement or returned demand.
MOUNTING INSTRUCTIONS: The fixture may be mounted in any position provided there is adequate room for ventilation and the fluid can not leak. It is important never to obstruct the front of the machine, fan or vents pathway. Mount the fixture using a secure clamp. Adjust the angle of the fixture loosening both knobs and tilting the fixture. After finding desired position, re-tighten both knobs. When selecting installation location, take into consideration refilling the tank and routine maintenance.
CONNECT WITH POWER SUPPLY – THE GROUND WIRE MUST BE CONNECTED: Use the plug to connect to the main power supply as follows: Wire Connection International signal Brown Live L Blue Neutral N Yellow /Cyan Earth QUICK TROUBLE SHOOTING If the unit is not functioning properly Check if main power is on and fuse hasn’t blown Check there is fluid in the tank Check the correct fluid has been used.
GENERAL MAINTENANCE To maintain optimum performance and minimize wear, the item should be cleaned frequently. Usage and environment are contributing factors in determining frequency. As a general rule, fixtures should be cleaned after use to avoid dust buildup and blockages. Which can result in poor performances, overheating and breakages. Be sure to power off fixture before conducting maintenance. Unplug fixture from power.
LAYOUT: 1. Bubble Output / Pour Fluid in here (Max 1.8L) 2. Carry Handel 3. Handheld remote 160.
REAR LAYOUT: 1. POWER IN (Use IEC Lead provided) 2. Power ON/OFF (Note when remote is not plugged in and unit is switched on the machine will operate continuously) 3. Remote input 4. Fan (do not cover) 160.
TECHNICAL SPECIFICATION Power supply 230Vac, 50Hz Fuse F1A Power consumption 40W Fluid Capacity 1.8l Dimensions 340 x 175 x 210mm Weight 1.2kg DISPOSAL: Please disposal of the unserviceable device according to the current statutory requirements.
Errors and omissions excepted. Copyright© 2012. AVSL Group Ltd. 160.
