SW-1 SNOW MACHINE Order ref: 160.569UK User Manual VERSION 1.
INTRODUCTION: SW-1 MINI SNOW MACHINE Guaranteed to bring a seasonal winter feel to any party or event. This compact unit will produce artificial snow over a distance of 6 metres. Ideal for mobile DJs and small parties • • • Ideal addition to a party. Integral wired remote with 2.5m lead Built-in 1.2 litre fluid tank 160.
PACKAGE CONTENTS: Please check the contents to ensure that the product has been received in good condition. SW-1 Snow Machine x 1pcs User’s Guide x 1pcs Power Cord x 1pcs 1 x Remote control If you find any accessory is missing or the machine has arrived with any problems, please contact your local dealer at once. Do not try to fix this item yourself or you will lose the warranty. Please keep the original package and invoice for any possible replacement or returned demand.
SETUP: 1. 2. 3. 4. 5. 6. 7. Unpack the snow machine Unscrew the top cap of the tank and remove to fill with the recommended snow fluid Replace the bottle and screw the cap securely ensuring the pipe is fed down to the bottom of the bottle so a consistent flow of fluid is supplied to the machine Connect the remote control Connect the IEC mains plug and power up Press the button on the remote control for 5 seconds so the fluid has a chance to flow through the heater block making it ready to use..
CONNECT WITH POWER SUPPLY – THE GROUND WIRE MUST BE CONNECTED: Use the plug to connect to the main power supply as follows: Wire Connection International signal Brown Live L Blue Neutral N Yellow /Cyan Earth QUICK TROUBLE SHOOTING If the unit is not functioning properly Check if main power is on. Check the fuse hasn’t blown. Check the unit isn’t in DMX mode. REPLACING FUSE Disconnect from the main power supply first, then remove the fuse holder above the IEC Socket to reveal the fuse.
LAYOUT SW-1: 1. Carry handle 2. Output nozzle 3. Removable fluid tank 160.
REAR PANAL SW-1: 1. Power ON/OFF Switch 2. Remote connection ONLY 3. IEC Connection (Power IN) 160.
TECHNICAL SPECIFICATION Power supply Fuse Motor Power Volume per minute Dimensions Weight 230Vac, 50Hz F3A 600W 5m 345 x 185 x 200mm 3.5kg DISPOSAL: Please disposal of the unserviceable device according to the current statutory requirements. Errors and omissions excepted. Copyright© 2012. AVSL Group Ltd. 160.
