BC4A ACTIVE SPEAKER SET Order ref: 170.145, 170.146 User Manual Active + satellite stereo pair Supplied with adjustable wall brackets RCA or 3.
Introduction Thank you for choosing the BC4A active speaker set. Please read this manual prior to use to avoid damage to the item. These compact, self-contained stereo speakers are designed to deliver high quality near-field or perimeter coverage for various monitoring and installed sound applications Contents Please take care when unpacking this product.
Setting up For near-field or desktop use, space speakers apart for adequate stereo separation depending on proximity to the listener. For installations using the supplied wall-mount brackets, attach the brackets to a solid surface using fixings which are sufficient to hold the weight of the active speaker. Take care to mount the active unit close enough to a mains outlet for the supplied adaptor to reach. Fix the speaker units to the brackets at top and bottom using the supplied screw caps.
Troubleshooting No output and Power LED not lit Check rotary switch is not set to “Off” Check mains adapter is connected and in good condition Check mains outlet is on Turn up rotary control Power LED lit but no output Sound output only from one speaker Output is very low Output is too loud or distorted Check signal lead is connected properly Check sound source is playing Check speaker wire is connected from active to satellite properly Check signal lead is connected properly Turn up rotary control Che