CT ACTIVE POWERED SPEAKERS Order ref: 170.254, 170.257, 170.260, 170.263, 170.
Introduction Thank you for choosing the Citronic CT-series active speakers as part of your sound reinforcement system. These high output cabinets are designed to offer high quality, dependable service for mobile and installed systems. Please read this manual fully and follow the instructions to achieve the best results with your new purchase and to avoid damage through misuse. Warning To prevent the risk of fire or electric shock, do not expose any of the components to rain or moisture.
Connection Connect line level signal from sound source to the INPUT XLR, ensuring that the MIC/LINE switch is in the out position (LINE). Alternatively, a microphone can be connected to the INPUT XLR and the MIC/LINE switch should be pressed in (MIC - note: not available on 170.266) Connect the OUTPUT XLR to any further active speakers that are to be fed the same signal.
Specifications Model CT8A CT10A CT12A CT15A CT15SA Power supply 230Vac, 50Hz Top hat Base mounted 35mmØ Top mount 35mmØ Horn Driver Titanium compression N/A Connector XLRF input, XLRM output Sensitivity 775mV System 2-way full range THD <0.04% Woofer 20cm (8“) 25cm (10“) 30cm (12“) 38cm (15“) 38cm (15“) Tweeter 2.5cm (1“) 2.5cm (1“) 4.4cm (1.75“) 4.4cm (1.
