CDUSB-2 CD/USB/SD PLAYER 2U Item ref: 170.
Caution: Please read this manual carefully before operating Damage caused by misuse is not covered by the warranty Introduction Thank you for choosing the CDUSB-2 CD/USB/SD player as part of your playback system. This product has been developed to provide a flexible, high quality audio source for PA, background music and DJ applications. Please read and keep this manual to achieve the best results from the unit and avoid damage from misuse.
Front Panel 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. 26.
Rear Panel 27. Fuse holder 28. Fig.8 mains inlet 29. Audio output Holder for 20mm mains fuse 250mA Connect to 100-240Vac power outlet using supplied mains lead Left + Right RCA line output Remote Control The CDUSB-2 is supplied with a handheld infra red remote control. Before use, insert 2 x AAA batteries into the rear compartment, observing the polarity as indicated. Most of the front panel controls are duplicated on the remote control handset. There are also some additional controls as detailed below.
Display 36. 37. 38. 39. 40. 41. 42. 43. 44. 45. 46. 47. 48.
Specifications Power supply 100-240Vac, 50/60Hz (fig 8) Power consumption 20W Anti-shock 20 seconds Pitch bend Up to ±16% USB input v.2.0 320GB max (500GB max self-powered) SD card slot SD cards up to 8GB Output connection L+R RCA Frequency response 20Hz - 20kHz (±2dB) SNR >90dB THD <0.1% Channel separation 81dB Output level 1.1Vrms @10k Ohms Output impedance 1k Ohms Remote : Battery 2 x AAA (supplied) Dimensions 482 x 260 x 94mm Weight 3.
