User Manual

sketch map(A)
sketch map(B)
sketch map(C)
sketch map(D)
sketch map(E)
sketch map(F)
sketch map(G)
sketch map(H)sketch map(I)
TE cabinet assembly instructions(600 wide)
Use the M5*10 Phillips pan head
screw and frange nut to fix the
mounting angle to the frame.
sketch map(A)
Use the M5*10 Phillips pan head
tapping screw to fix the other
mounting angles to the frame.
sketch map(B)
Use the M5*10 Phillips pan head
tapping screw to fix the caster tray to bottom of the frame.
sketch map(C)
Use the M5*10 Phillips pan head
tapping screw to fix the bottom
panel to the inside bottom of the
frame.
sketch map(D) sketch map(E)
Use the hexagonal soket B head
screw and flange nut to fix the
mounting rail to the mounting
angle ,and then fix the L shaped
supporting brackets to the mounting
rails.
sketch map(F)
Use the M5*10 Phillips pan head
tapping screw to fix the fan unit to the inside top of the frame.
Use the M5*10 Phillips pan head
tapping screw to fix the top cover to the frame.
sketch map(G)
sketch map(H)
Fix the bottom brackets onto
the bottom of the side panels
/back panel,and install the
flush latch into the panels.
Place the door pivot pin into the mounting hole
in the bottom of the frame,and then carefullly
place the door onto the door pivot pin. Pull
down the latch at the top of the door.Set the door upright and release the top latch. Make
sure the top of the door match up with the
frame.
sketch map(I)