CLB12A, CLB15A ACTIVE SUBWOOFERS Order ref: 178.271, 178.
Introduction Thank you for choosing the Citronic CLB-series active subwoofer as part of your sound reinforcement system. Please read this manual fully and follow the instructions to achieve the best results with your new purchase and to avoid damage through misuse. Unpacking Your CLB active subwwofer should reach you in good condition and be supplied with the appropriate mains power lead(s). If there is any damage or items missing, contact your retailer immediately.
Connection Connect balanced or unbalanced line level signal(s) from sound source or audio mixer to the L+R combo inputs using good quality XLR or 6.3mm jack leads. Connecting to either of these will work for a mono input. Connect the OUTPUT XLR to any further active speakers or amplifiers that are to be fed the same signal. Connect the supplied mains cable from the IEC connector to a suitable mains outlet, ensuring correct voltage and adequate current capacity.
Specifications Model Power supply Pole Mount Input connection Output connection Driver Impedance Driver: Coil size Driver: Basket Output power: RMS Frequency response (-3dB) Crossover frequency Sensitivity (1m, 1W) Maximum SPL THD Dimensions Weight CLB12A CLB15A 230Vac, 50Hz (IEC) 35mm cast metal socket Balanced or unbalanced line L+R combo connectors (6.
