CV SERIES Active Speaker Cabinets Item ref: 178.154UK, 178.157UK, 178.160UK, 178.
Caution: Please read this manual carefully before operating Damage caused by misuse is not covered by the warranty Introduction Thank you for choosing this CV series active cabinet. This cabinet combines a powerful digital amplifier section with a high density moulded enclosure for high output and efficient performance. Please read this manual prior to use to avoid damage through misuse. Package Contents Please check the contents to ensure that the product has been received in good condition.
Rear Panel 1. 2. 3. 4. 5. 6. 7. MIC input (XLR or jack) LINE input (XLR or jack) LINK outputs (XLR) BASS EQ controls TREBLE EQ controls VOLUME controls SIGNAL/CLIP indicators Operation Connect the CV-series active speaker unit to the mains using the appropriate mains IEC lead supplied. Combined 6.3mm jack or XLR (balanced or unbalanced) inputs are provided to connect either a microphone, line input or both.
Specifications Model CV8A CV10A CV12A CV15A Power supply 110-240Vac, 50/60Hz (IEC) Flying Points 2 x M8 + 2 x rear hook points LF driver 200mm (8“) 250mm (10“) 300mm (12“) 380mm (15“) LF driver: Coil size HF driver 35mmØ 50mmØ 65mmØ 75mmØ 38mmØ Ti 38mmØ Ti 62mmØ Ti 62mmØ Ti HF driver: Coil size 25mmØ 25mmØ 44mmØ 44mmØ Power rating: RMS 75W 150W 300W 400W Power rating: Max 150W 300W 600W 800W Crossover frequency 3.5kHz 3.5kHz 3.0kHz 2.