Technical data

PAGE 132
Option: MAGIC Hybrid Keypad
9.2.1 Configuration of operating mode
When there is no connection, the configuration of the Hybrid is displayed.
The following operating modes are possible:
– Standard: always only one caller is On Air or in Pre Talk. All other
callers are automatically in the Hold position.
– Conference: all callers in the On Air or Pre Talk modes are mixed.
– Next: the callers are automatically on Hold. By pressing the Next but-
ton the first caller goes On Air. By pressing this key once again, the
connection with this caller will be dropped (or switched to Hold or
Pre Talk depending on the configuration) and automatically, the
next caller goes On Air.
9.2.2 Entering the telephone number
When dialling the telephone number, the dialled number is displayed.
The number must be entered by the ... keys.
9.2.3 Level meter
If there is an existing connection, the level meter is displayed
1
. This display
has a maximum of 4 characters and 5 segments. The smallest representable
level is -34 dBu. The scale is divided into 2 dB steps. The maximum value is
+6 dBu.
L
If the MAGIC TOUCH software is installed, the operating mode cannot be set
via the MAGIC Hybrid Keypad.
L
The last number entered may be cancelled by pressing the key.
The whole input can be cancelled by pressing the key.
1
The MAGIC Hybrid Keypad 7 and the MAGIC Hybrid Keypad 12 display the level meter
vertically.
---- ---- ---- ----
STANDARD A
---- Hold ---- ----
09115271135 A
AIR PRE HOLD ----
A