Technical data

ManualsBrandsAVT ManualsConsumer electronicsMAGIC ISDN

PAGE 31

Operation via Display and Keypad

To activate a Quick Dial, from the main menu just press the desired Quick

Dial number for at least 3 seconds. The connection to the subscriber is es-

tablished automatically.

4.3.3 Configuration management

The MAGIC TH2 differentiates between

System Settings

and

Operation Set-

tings

System Settings are settings, which do not change during normal operation,

like for instance language, date/time etc. These parameters cannot be saved

in a preset since a configuration is usually only required when putting the sys-

tem into operation.

Operation Settings, like for instance the line interface ISDN or POTS, Ring

Tone, Signal Processing etc., must possibly be reconfigured depending on the

respective application. To easily recall recurrent configurations you can store

up to 10 presets in the system.

The

Presets

menu is reached by pressing the

softkey once and the cur-

sor key twice followed by a confirmation via the

Select

softkey.

In the input field

Presets

you can search for a certain configuration. As soon

as you enter a character, the entries in the Presets list in demand are retrieved.

Alternatively, you can select a configuration from the list via the cursor keys

and

By pressing the

button the configuration is loaded immediately.

The following functions, which you can select via the

Select

softkey, are im-

plemented by the

Opts.

(Options) softkey:

–

Load

: The stored configuration is loaded.

–

New

: By the use of this function you create a new configuration. All current

Operation Settings are saved.

–

Save

: The currently selected configuration will be overwritten with the

current Operation Settings. For safety reasons you have to confirm your

selection.

–

Delete Preset

: The currently selected configuration will be deleted. For

safety reasons you have to confirm your selection.

TIP

Just as the configuration menus the phone book functions can also be reached

directly via the QuickBook function. Please press the following key sequence:

Names Opts. <Digit>

Example:

Save as Quick dial

Names Opts. 5

NOTICE

If the configuration has changed, you are asked if you want to

Save Settings?

when you leave the configuration menu. Via the

Yes

softkey the setting is

stored permanently in the system. This configuration is loaded automatically

by the system after the connection to the power supply.