User manual

CONNECTION

2.3 Manual Connection Setup

To manually assign a channel to connect to the IP camera, select a corresponding “PROTOCOL” from the drop

down list first, click “URI” to enter the address of the camera, and enter its port number. There are four protocol

types available in the drop down list as follows: “AVTECH”, “ONVIF”, “RTSP OVER HTTP”, and “RTSP OVER

UDP”. If you are using AVTECH IP cameras, please select “AVTECH”; otherwise, choose the protocols your

cameras support.

ADVANCED CONFIG

CONNECTION CHANNEL PROTOCOL URI PORT

PATH CONFIG

CAMERA

CH1 AVTECH ://ip_office.ddns.eagleeyes.tw :80 / SETUP

DETECTION

CH2 ONVIF ://10.1.1.14 :88 / SETUP

ALERT

CH3 RTSP OVER HTTP ://10.1.1.30 :88 / SETUP

NETWORK

CH4 RTSP OVER UDP ://10.1.1.12 :88 / SETUP

DISPLAY

CH5 AVTECH ://10.1.1.16 :88 / SETUP

RECORD

CH6 AVTECH ://10.1.1.13 :88 / SETUP

NOTIFY

EXIT