242Z AVI321 / 311 Network Camera Series Quick Guide All lead-free products offered by the company comply with the requirements of the European law on the Restriction of Hazardous Substances (RoHS) directive, which means our manufacture processes and products are strictly “lead-free” and without the hazardous substances cited in the directive. The crossed-out wheeled bin mark symbolizes that within the European Union the product must be collected separately at the product end-of-life.
OVERVIEW 1. PRODUCT OVERVIEW 1.1 Description This PTZ network camera series is a high-performance device for use in professional and demanding surveillance situation. It supports multiple network protocols for MPEG4 or MJPEG live video transmission, and you can easily view, record and operate the camera via the supplied video viewer software or the web browser. Video surveillance over IP network infrastructure is available and easy from anywhere, at anytime. 1.
OVERVIEW 1.
OVERVIEW 1.
CONNECTOR OVERVIEW 2. CONNECTOR OVERVIEW 2.1 CONNECTOR OVERVIEW CONNECTOR DESCRIPTION Power Connector Connect the DC 12V adapter for power supply. Video Output Connector Connect to the video input connector of your monitor with a video cable (i.e. a RCA line with the BNC connector, or a coaxial line) for video output. * The video cable is not included with the sales package.
INSTALLATION 3. INSTALLATION 3.1 Install the Hardware (For AVI321) Before installation, you need the following items before installation: ‧ Bracket (supplied with the bracket sales package) ‧ The accessory packages supplied with the bracket sales package, including: (1) Wall mounting screws (2) Wall plugs (3) Cap (4) M6 Nylok screws (5) Spirit level (6) M4 screw ‧ Power Drill STEP 1: Attach the camera-mounting base to the PTZ camera.
INSTALLATION STEP 3: Attach the PTZ network camera to the bracket. Turn the camera up side down, and put the power, video and RS485 data connectors through the hole of the bracket. Then, slightly secure the camera and the bracket with three M6 Nylok screws. STEP 4: Check the surface is horizontal or not. Use the spirit level to check the surface is horizontal or not, and adjust the tightness of the M6 Nylok screws.
INSTALLATION 3.2 Install the Hardware (For AVI311) Before installation, you need the following items before installation: ‧ The accessory package which includes: (1) Wall mounting screws (2) Wall plugs (3) Decoration covers ‧ Power Drill or screwdriver STEP 1: Mount the camera to the ceiling. Attach the camera to the ceiling, and fasten the camera with the supplied 3 screws. STEP 2: Push the decoration covers to the camera to lock.
INSTALLATION 3.3 Assign an IP address and Access the Camera Step 1. Install the Software Place the supplied Video Viewer AP software CD into your DVD- / CD-ROM drive. The installation process will automatically start. Follow the on-screen instructions to install the application programs. After installation, a “Video Viewer” shortcut icon will be shown on your PC desktop. Step 2. Connect the network camera to the Internet access via a RJ-45 network cable. Step 3.
APPENDIX 1 DEFAULT VALUE 4. VIDEO VIEWER BASIC OPERATION 4.1 The Live View Page After setting up the network information, login user name and password, double-click “ ” on the PC desktop to open and log into the Video Viewer control panel. You will see a screen similar to the following with 6 major sections: ‧ Connect to only one network camera ‧ Connect to multiple network cameras (ex. 4 cameras) ‧ 1-cut display ‧ 4-cut display NO.
APPENDIX 1 DEFAULT VALUE 4.2 Address Book This view is displayed when the Video Viewer is activated for you to login / out the network camera from the current address list, or search the available IP address as follows: (Address Book) Click to view the pre-defined network camera access details. To login, choose one IP address from the address list, and click the address twice; to logout, click the connected IP address twice.
APPENDIX 1 DEFAULT VALUE (Search IP Address) Click to search and view the available IP address(es) for the network connection. You can choose one address to add into the address book, edit the details, or update the address list. NO. Button Function Description Select from the available IP address list, and click this button. Key in the network camera access information needed, and click “Apply” and “Close” to add the selected address to the address book.
APPENDIX 1 DEFAULT VALUE 4.4 Playback To play a recording, click “ ” (Miscellaneous Control) → “ ” (Status List), and select the “Record” tab. A list of all the recordings will be shown by defaults, and you can also sort out the logs you want to speed up the search time. For details, please refer to your user manual. To immediately play a recording file, select a log from the list, and click “Play” button, or double-click the selected log.
