Manual

ManualsBrandsAVTECH ManualsHardwareLight Tower & Relay Adapter (LT-32-ADP)

AVTECH Software, Inc.

Temperature & Environment Monitoring… Made Easy!

AVTECH.com

Light Tower & Relay Adapter (RMA-LTA-SEN)

Installation Note

AVTECH’s Light Tower & Relay Adapter (LTA) expands the capacity of your Room Alert

monitor. With it, you gain a built-in relay port to control 1 electrical appliance and a custom port

to connect and control:

• 1 AVTECH Relay Switch Sensor

+ 3 electrical appliances

+ 1 general alarm to Room Alert or alarm panel

• 1 AVTECH Light Tower (any model)

Sample Light Tower & Relay Adapter product configurations are shown below.

With Room Alert’s web interface or AVTECH’s Device ManageR software, you may

automatically or manually turn on & off electrical devices—such as the ones shown here—and a

Light Tower’s individual LEDs and audio alarm (if available).

For more information about AVTECH’s Light Towers and/or Relay Switch Sensor, please see

their Installation Notes, visit AVTECH.com or contact a Product Specialist.

Appliance

Connected To

Relay Port

Light Tower (Any Model)

Relay Switch Sensor

(Connecting Other Appliances)

Summary of content (5 pages)

PAGE 1
Light Tower & Relay Adapter (RMA-LTA-SEN) Installation Note AVTECH’s Light Tower & Relay Adapter (LTA) expands the capacity of your Room Alert monitor. With it, you gain a built-in relay port to control 1 electrical appliance and a custom port to connect and control: • 1 AVTECH Relay Switch Sensor + 3 electrical appliances + 1 general alarm to Room Alert or alarm panel OR • 1 AVTECH Light Tower (any model) Sample Light Tower & Relay Adapter product configurations are shown below.
PAGE 2
Light Tower & Relay Adapter (RMA-LTA-SEN) Light Tower & Relay Adapter Package Contents • • • • One (1) Light Tower & Relay Adapter ID Box One (1) 25' RJ-11 Cord One (1) AVTECH International Power Adapter One (1) Installation Note (You’re reading it now.
PAGE 3
Light Tower & Relay Adapter (RMA-LTA-SEN) Step 3: Connect your Light Tower & Relay Adapter to your Relay Switch Sensor or Light Tower. AVTECH’s Light Tower (any model) and Relay Switch Sensor each come with a custom cable that connects to your Light Tower & Relay Adapter via the custom port. 1. Connect one end of the custom cable to the Light Tower & Relay Adapter’s custom port. 2. Connect the other end to the custom port on the Relay Switch Sensor.
PAGE 4
Light Tower & Relay Adapter (RMA-LTA-SEN) 1. In “Light Tower/Relay Label,” you may leave the default, “Light Tower 1” or enter your own label, such as “Server Rm RYG” or “RYG Manuf Fl 8.” 2. In “Connected Light Tower/Relay,” select the appropriate option from the choices in the drop-down menu. For this example, we are choosing Red/Yellow/Green w/Audio to work with the Light Tower w/Audio. 3. Once you choose your device, the “Alarm Profiles” grid beneath it expands.
PAGE 5
Light Tower & Relay Adapter (RMA-LTA-SEN) 5. Find your sensor’s interface and choose the profile you’ve configured from the dropdown list in “Use Alarm Profile.” 6. Click Accept Changes at the bottom of your screen to temporarily save your settings. You may now navigate to another screen; however, if you close the web interface before the next step, you will lose your changes. 7. Click Save Settings in the navigation bar to the left of your screen.