Easy Setup Guide RPS800
Items Included A Body (x1) C Camera Support (x1) D Acrylic Platform Caster Braker (x1) J I (x2) F Handle Caster (x2) (x2) E B Base (x1) G Screw H Screw 1/4x3/4 (x2) 5/16x1”1/4” (x4) P Washer Q Washer O 1” (x8) K Flange Nut 1/4”(x4) L Acorn Nut 1/4” (x4) Socket Flat Head M Regular Nut 1/4”x3/4”(x4) 3/4” (x8) Support (x1) 5/16” (x4) R Allen (x1) S Multi Wrench N Flange Nut 5/16” (x11) (x1)
Place body(A) on base lining up bolts on base with holes on body(A), then secure the joint using flange nuts. 1 A N B J I J I 2 B Assemble Casters (I , J) to base (B). Two in front with brake and two in the back without brake.
C D 5 Adjust Camera Support (C) height according to the size of your TV and then secure the position using two 1/4”x3/4” srews H A 6 Refer to wall mount intructions. G 8 Hang the TV to the Support (E) P E M Q 9 Assemble the handles (F) to the support (E) using the screws on the handle and 4 flang nut (K).
Lock Assembly Nut a Pull b Cilinder 1 c Slide Pull over Cylinder. The Flange must be as shown in the diagram 2 Slide Cylinder through hole in glass as shown in diagram 3 Twist Nut onto Cylinder as shown in diagram. Ensure that it’s placed in the correct position as shown in diagram.
