Operating instructions

9-16
FITTED EQUIPMENT
Cleaning
Before using the refrigerator, it is advisable
to clean the appliance both inside and out.
• Use a soft cloth and lukewarm water
with a mild detergent.
• Then rinse the appliance with clean
water and dry thoroughly.
• Remove dust from the refrigerator unit
at yearly intervals using a brush or soft
cloth.
WARNING: To avoid deterioration of
materials:
1. Do not use soap or hard, abrasive or
soda-based cleaning agents.
2. Do not allow the door seal to come into
contact with oil or grease.
Using the refrigerator
• The cooling unit is silent in operation.
• When the appliance is first put into
operation, there may be a mild odour
which will disappear after a few hours.
Ensure the living area is well ventilated.
• The refrigerator will take several hours
to reach its operating temperature in the
cooling compartment.
• The freezer compartment should be cold
about one hour after switching on the
refrigerator.
Note: An on-board battery is necessary to
run your re-igniter refrigerator on gas.
A=energy selector switch
B=gas/electric thermostat AC/DC
C= operating displays (3 LEDs)
CONTROLS
Energy Selection
12V Electrical Operation (DC)
• The refrigerator will only operate while
the motor is running and the vehicle in
motion.
1. Set energy selector switch (A) to 12V.
2. Operating display "C", 12V lights
"green". Appliance is in function.
3. Use rotary switch (B) to regulate the
temperature in the main refrigerator
compartment.
REFRIGERATOR MODEL RM7271L