TFT-LCD TV W102D USER MANUAL READ CAREFULLY BEFORE OPERATION W102D
IMPORTANT SAFETY INSTRUCTIONS TO PREVENT ELECTRICAL SHOCK. CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN. DO NOT REMOVE THIS COVER. NO USER- SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol indicates dangerous voltage inside the product that presents a risk of electric shock or personal injury. This symbol indicates important instructions accompanying the product. Please read this manual carefully before using this product.
IMPORTANT SAFETY INSTRUCTIONS Do not clean the front with keton-type materials (e.g.Acetone ),ethyl alcohol, toluene, ethy lacid, methyl, or chloride-these may damage the panel. Locate your DC adapter near an easily accessible AC outlet. If your LCD TV does not operate normally in particular, if there are any unusual sounds or smells coming from it unplug it immediately and contact an authorized dealer or service center. High temperature can cause problems.
CONTENT INSTALLATION Mounting bracket install 1 Headrest bracket installation 2 Can adapter connection 3 Battery pack installation 4 Battery installation 9 PANEL BUTTON FUNCTIONS Panel control 6 EXTERNAL EQUIPMENT Connecting diagram 7 REMOTE CONTROL HANDSET Remote buttons 8 LET'S START Change source operation 11 TV MENU SETUP Picture Channel edit 12 14 TV setting 13 System 15 AV SETUP AV setup 16 DVD OPERATION Brief introduction 17 Features 18 Compatible disc types 19 Playbac
CONTENT DVD FUNCTION SETUP 30 Audio setup 30 Video setup 31 Preference setup 32 Password setup 33 Video setup 34 38 System 39 40 DVD troubleshooting 41 General setup DVB FUNCTION SETUP General setup 34 DVB-T setup 35 FM OPERATION FM TROUBLE SHOOTING TV troubleshooting SPECIFICATIONS Specifications 42 DISPLAY MODE Display mode 43
INSTALLATION HEADREST BRACKET INSTALLATION Take the backboard and 4 screws from accessories, and lie the host machine flat, with bottom casing facing upwards. According to the direction shown in the figure, make the 4 screw holes in the backboard aim at the 4 in the bottom casing of the host machine, and then use 4 screws to fix the backboard onto the bottom casing of the host machine (shown in the figure 1).
INSTALLATION When taking out the host machine, press the clasp plate backwards to make the host machine come loose, and then take the host machine with one hand. Figure 3: Clasp plate Install the host machine and headrest bracket onto the car seat, with the effect shown in the figure 4. Figure 4: CAR ADAPTER CONNECTION Connect car adapter (make sure to use the recommended accessories only) to the socket in your car correctly.
BATTERY PACK BATTERY PACK INSTALLATION 1. Installing battery pack Place this unit to the center of the back, then slide the battery pack to secure it as the direction (figure 1 ). 2. Use battery If the battery is full, you can use this LCD TV freely. If the battery pack is installed correctly, the indicator on the TV will turn red. If not, please check whether the battery is full or be installed correctly. When the voltage of the battery is lower than 5.8V, the TV set will turn off automatically.
BATTERY PACK After battery pack is fully charged, the green indicator is always on ,which mean that the battery pack has been fully charged, so please unplug the power cord. If the indicator has other displays after power-on of the system, it means the battery pack has troubles. Please unplug power cord and contact the appointed servicing personnel.
PANEL BUTTON FUNCTIONS PANEL CONTROL 3 4 5 6 7 8 9 10 11 12 20 13 14 15 16 17 18 19 1 2 Front panel 1 2 Indicator( Indicator is red when in standby mode, green when working normally.
EXTERNAL EQUIPMENT CONNECTING DIAGRAM The left of TV set VIDEO L R DVD or VCR player L VIDEO R TV NOTE You should insert any interconnecting cables BEFORE plugging in the power cord.
REMOTE CONTROL HANDSET REMOTE BUTTONS 1 2 2 1 3 4 3 VOLUME+/Increases or decreases sound amplitude 4 CHANNEL+/Steps up/down program numbers. 5 RETURN To swap between a previous program and the current program (only valid in TV mode.) 6 RATIO Switch the picture mode in 4:3 or 16:9. 7 SETUP Display setup menu, different in TV and DVD mode. B.L ON/OFF To turn on/off the screen ( only valid in radio mode).
REMOTE CONTROL HANDSET (contd) 17 EJECT Disc in/out ,valid in DVD mode. 18 MUTE Sound mute button. Number buttons To select program number. 19 18 17 TWO-DIGIT button Switches between one or two-digit program numbers. 21 SOURCE Select input source: TV, DVD, AV, DVB, FM. 20 22 23 24 25 OK button To confirm a selection/item in menu. LEFT/RIGHT cursor To move left/right or adjust a selected item in menu. UP/DOWN cursor To navigate upward/downward in the menu.
REMOTE CONTROL HANDSET BATTERY INSTALLATION When installing battery , please make the two polarities of battery accord with the two polarities inside the battery case (positive upward, negative downward), as the following figure: CR2025 CR2025 2 1 Step 2: Pull the battery holder out. Step 1: Push the button toward left. Step3:Insert one 3VOLTAGE LITHIUM BATTERY matching the -/+ polarities of the battery to the -/+ marks inside the battery compartment,as the bitmap.
LET'S START After the unit has been suitably placed / fixed, on the desk or on your car, and all cords are connected for power, input and output . If your unit is not fixed with the battery pack, connect the adapter to the LCD TV, the unit will go into standby mode, and you can see the indicator get into red. If your unit is fixed with the battery pack, and the quantity of electricity is high enough, the unit will go to standby mode, indicator turn red.
TV MENU SETUP This product can store up to 100-channel programs (0 99). You can scan and store all the channels through manual or automatic mode. In TV mode, press [SETUP] button on the remote control or top panel and menu will show as follows: Through pressing [ ] button on the remote control, you can select main menu sections(main menu PICTURE sections consist of " PICTURE " , " TV SETTING " , " SYSTEM ") . Press [ PICTURE MODE ] or [OK] button to enter this menu section.
TV MENU SETUP TV SETTING Select " "and menu will show as follows: TV SETTING CHANNEL 2 COLOR SYSTEM AUTO I SOUND SYSTEM 136.20MHZ FINE TUNE MANUAL SEARCH AUTO SEARCH CHANNEL EDIT SELECT Press [ ENTER OK ] button to select item and press [ Item RETURN SETUP ] button to adjust . Description CHANNEL To change the channel number. COLOR SYSTEM Can be changed between: "Auto", "PAL" and "SECAM". SOUND SYSTEM Can be changed between:"BG", "DK", "I" and "L" .
TV MENU SETUP during the searching, you can press [SETUP] button to stop. CHANNEL EDIT TV SETTING CHANNEL 2 SKIP OFF SWAP SELECT Item 38 ADJUST RETURN SETUP Description CHANNEL To select current channel . SKIP To select "ON" or "OFF ", you can select " ON " to make current channel unaccessible while using [CH+/-] button to browse channels. SWAP Press [ ] button to select the channel, and press [OK] button to swap the channel.
TV MENU SETUP SYSTEM You can setup some system configuration here. Press [ ] to select " " item and press [ ] button to enter the following section: SYSTEM LANGUAGE ENGLISH TRANSPARENCY LEVEL 2 SLEEP 0 RATIO 16 : 9 RESET SELECT Press [ ENTER OK ] button to select item and press [ Item RETURN SETUP ] button to adjust or activate. Description LANGUAGE Select OSD language. TRANSPARENCY To change transparency of OSD.
AV SETUP If no signal input in TV, AV, the screen will show a similar signal like the following figure. This unit will go into standby mode automatically if there is no signal input for more than 5 minutes.
DVD OPERATION Brief Introduction DVD is well known for its extraordinarily large capacity and outstanding audio-video effects. Its capacity is as high as 4.7-17 GB (approximately 7-26 times the CD capacity).With 500-line horizontal resolution of picture , it brings a new era to the household AV products. Comparison Between DVD and Other Discs LD DVD Capacity Playback time Singlesided 1 layer 4.7G Singlesided 2 layers 8.5G Doublesided 1 layer 9.4G 12cm/8cm 1 side 60min. 2 sides 120min.
DVD OPERATION Features This player has employed the new generation DVD decode chip with built-in Dolby Digital decoder which will bring you to a brand-new AV ententainment world. The 2-laser super error-correction mechanism supports CD-R. Brand-new AV Effects Compatible with MPEG4 discs to produce wonderful pictures. 108MHz/12bit video DAC, with more vivid and brilliant pictures.
DVD OPERATION Compatible Disc Types Types DIGITAL VIDEO Sizes Recorded Contents 12cm CD-DA 12cm VIDEO CD Compressed digital audio+compressed digital video (dynamic picture) 12cm SVCD: Compressed digital audio+compressed digital video (dynamic picture) 12cm DVD: Compressed digital audio+compressed digital video (dynamic picture) 12cm DVD: Compressed digital audio + compressed digital video(still picture) Digital audio NOTES Issues related to DVD MPEG4 SVCD VCD CD These icons on the top
DVD OPERATION VCD, SVCD MENU PLAYBACK SVCD VCD When playing SVCD, VCD2.0 discs with menu playback function, you may enjoy simple menu playback alternation function. You may set menu playback state in the setup menu and select menu playback or sequence playback. For instance, VCD 2.0 disc menu playback. 1. TV screen displays main menu. 1. 2. Press number buttons to select. For instance, press number button 1 to select main menu 1. 1. 2. 2. After entering main menu 1, TV screen displays submenu. 1. 2. 3.
DVD OPERATION SELECT TRACK TO PLAY DIRECTLY BY NUMBER BUTTONS SVCD DVD VCD CD 1. Insert disc, after disc reading and normal playback, press number buttons to select track to play directly. If track number is less than 10, press number buttons 1 to 9 to directly select. For instance, select the seventh track: 7 If track number is more than or equal to 10, press [-/- -] button and then number buttons 0 to 9.
DVD OPERATION REPEAT PLAYBACK DVD MPEG4 SVCD CD VCD The repeat playback function enables a certain title/chapter/track/disc repeated. 1. Press [REPEAT] button. Each press of REPEAT button may realize different repeat functions. DVD DISC: Title Chapter ALL Repeat Off SVCD, VCD, CD discs: To SVCD, VCD2.0 discs, the repeat function is effective in sequence playback mode; to VCD1.1, CD discs, the repeat function may be directly operated. Track ALL Repeat Off To SVCD, VCD2.
DVD OPERATION FAST PLAYBACK MPEG4 DVD SVCD VCD CD When playing discs, you may select fast forward or fast backward playback to search a certain point. 1. Press [ ] button and the unit begins fast forward playback. Press [ ] button each time and the disc playback speed switches in the following sequence circularly: 2X 4X 8X 32X 16X 2. Press [ ] button and the unit begins fast backward playback.
DVD OPERATION Play MPEG4 disc 1. Select track Press [GOTO] button until TV screen displays the following figure. Then press number buttons to input the track. Select 2. Search track time Press [GOTO] button until TV screen displays the following figure. Then press number buttons to input hour, minute and second. -:--:-- Play SVCD, VCD and CD discs 1. Search disc time Press [GOTO] button until TV screen displays the following figure. Then press number buttons to input minute and second.
DVD OPERATION The strong decoding capability of this unit can decode and play the files with the above formats. In the course of playing, an operation menu will appear and its construction is shown as follows. 1 00:00 00:00 004/369 1 \PIC\ 3 Du000 Du001 4 Du002 5 6 4 Scroll bar window Indicate the current file's position. information. 2 .. State window Display the current state 2 DIR window 5 Display the current path. 3 File window Preview window JPEG image preview.
DVD OPERATION 2. Play JPEG file After you put an JPEG format file into the unit, it will search disc information and display the operation menu as in the following figure. After selecting JPEG file, the preview window will appear this file's preview image to facilitate you to select. After you select the JPEG file you desired and press [OK] button to confirm, the picture will display in full screen. 00:00 00:00 004/369 \PIC\ .. Du000 Du001 Du002 RESOLUTION 640 480 Other basic operation methods 1.
CARD READER AND USB OPERATION USAGE OF USB DEVICE AND 3 -IN-1 CARD READER USB refers to Universal Serial Bus. Most of USB devices on the market are USB1.1 or USB2.0. Here are some common types of USB 1.1 devices: Monitors, Communication devices, Audio Human Input Device(HID), Mass storage drives etc. Most flash memory ,USB HDD etc. belongs to Mass Storage Class. Mass Storage Class includes 2 transport manners: 1. USB 1.1 Mass Storage Class Control/Bulk/Interrupt (CBI) Transport 2. USB 1.
CARD READER AND USB OPERATION NOTES This player can play USB devices and MPEG4 and JPEG files in SD, MMC and MS cards. When reading MPEG files with large size in USB device or media card, pause may appear. If there is no files in USB devices or media card , on-screen appears a empty operation menu to remind you that the device is empty. If USB devices or media card have a problem, or the operation is incorrect, the screen appears "Device Error".
DVD FUNCTION SETUP GENERAL SETUP General Setup Page TV Display OSD Lang Screen Saver Last Memory Wide ENG On On Go To General Setup Page 1. TV Display: This item is used to set the output picture ratio of this unit. Optional settings: Normal/PS, Normal/LB, Wide, Wide Squeeze; Default: Wide. 2. OSD language: This item is used to set the OSD language . Optional settings: English; Default: English 3. Screen Saver: Open or close the screen saver. Optional settings: On, Off; Default: On 4.
DVD FUNCTION SETUP Dual Mono: Optional settings: Stereo, L-Mono, R-Mono, Mix-Mono ;Default: Stereo. Dynamic: Set Dolby digital sound dynamic level, Default: Off 3. Equalizer : Equalizer Page EQ Type Bass Boost Super Bass Treble Boost None Off Off Off None Rock Pop Live Dance Techno Classic Soft Select Equalizer Type EQ Type: Set equalizer type, optional settings: None, Rock, Pop, Live, Dance, Techno, Classic, Soft; Default: None.
DVD FUNCTION SETUP PREFERENCE SETUP Preference Page TV Type PBC Audio Subtitle Disc Menu Parental Country Region Default PAL On ENG ENG ENG Off ENG Go To Preference Page 1. TV Type: To set the output video system of this player. Optional settings: PAL, Auto, NTSC; Default: PAL. 2. PBC: To set the PBC status. When playing SVCD, VCD2.0 discs, if PBC is set On, this unit enters PBC playback mode; if PBC is set Off, the unit plays the disc according to track sequence.
DVD FUNCTION SETUP PASSWORD SETUP Password : This item is used to set a four digital password to enable you to change the parental control ratings. Password Setup Page Password Mode Password On Go To Password Setup Page Password Mode: To set whether parental control function need a password, optional setting: On, Off; Default: On. Password : To change the password of parental control function, default :000000.
DVB FUNCTION SETUP Turn on this TV, press [SOURCE] button to change source to DVB, then you can enjoy the rich and colorful contents of Digital Video Broadcast! In DVB mode, press [SETUP] button, then press [ setup menu will be displayed as follow: ] button to choose DVB item, the DVB GENERAL SETUP DVB General Setup Page TV Display Wide OSD Lang ENG TV Type PAL Default Go To General Setup Page 1. TV Display: This item is used to set the output picture ratio of this unit.
DVB FUNCTION SETUP DVB-T SETUP DVB DVB- T Setup Page Area Time Zone Parental Age Channel setup ENG Dis Go To DVB - T Setup Page The DVB-T Setup Page is composed of four parts: Area, Time Zone, parental Age, Channel Setup. Note : Press [ ]button to select different item , and press [OK] or [ ] button to enter it. Press [ ] button to return to the previous menu or to exit the current menu . 1. Area You can choose the area of your country.
DVB FUNCTION SETUP Auto Scan Connect the antenna to the RF socket on the TV, if the antenna need power supply, please press [ANT. ON/OFF] button to turn on the power for the antenna . Then you can automatically search channels without entering any other information. In the scan process, the scan result will be displayed in the Auto Scan window. Auto Scan Status Freq: 65000KHz TV Total: 00 Radio Total: 00 Progress: Found Channels 40% Press [DVD MENU]on remote control more than 3 seconds to auto scan. 1.
DVB FUNCTION SETUP 2.Select channel using [ ] button , if you don't like this channel press [GREEN] button to delete it . 3.Select channel using [ ] button, press [YELLOW] button to set this channel as a protected one, to from your children to watch the undesied program in it. Note: If you set channel protected, password need to be input in Protect Channel window. The default password is 000 000. Channel remap You can change every channel position as you like in channel remap window.
FM OPERATION FM With radio decoder built in , you can enjoy radio programs using this unit. Connect the FM antenna in the accessories to the to the FM socket on the left panel of the TV, change source to FM. Press [SETUP] button and a menu will show as follows: FM 12 CHANNEL 101.20MHz FREQUENCY MANUAL SEARCH AUTO SEARCH SELECT ENTER OK RETURN SETUP 1. CHANNEL: Display current channel number, press [ ] button to change channel. 2.
FM OPERATION SYSTEM In FM setup menu, select " ", a FM system menu will be displayed as follows: SYSTEM ENGLISH LANGUAGE LEVEL 3 TRANSPARENCY OFF SLEEP SELECT ENTER OK RETURN SETUP 1. LANGUAGE Set FM setup menu language. For English, only English. 2. TRANSPARENCY Set the transparency level of FM setup menu, optional settings : OFF--LEVEL 6. 3.SLEEP Set the time of how long the TV to go to standby mode automatically. optional settings: OFF--240MIN,10 minutes a step.
TROUBLESHOOTING Please check for causes of problems in accordance with the following chart before contacting any maintenance personnel.
TROUBLESHOOTING DVD TROUBLESHOOTING Symptom Can t play Sound distortion No sound No image No color Causes Correction 1. Condensation on laser head 2. Disc not properly loaded 3. Disc not compatible with the unit 1. Too large volume of connected device 2. Sound field mode not suitable for disc 1. Clean the disc 2. The unit in mute state 2. Press MUTE button to cancel it. 1. TV not set for proper system 1. Reset AV/TV state of TV 2. In backlight off mode 2. Press [B.L.ON/OFF] button 1.
FM antenna RF Battery pack FM Lithium rechargeable battery 5000mAH, 7.4V Input connector Frequency range (VHF/UHF) IEC-Type, IEC 169-2, Female Channel range(VHF/UHF) 7 & 8 Mhz FM frequency range 87.
DISPLAY MODE SUPPORTED VIDEO INPUT MODE Format Hor scanning frequency Ver scanning frequency Vert scan type 720X480 31.47 59.94 480P 720X480 15.734 59.94 480i 720X576 31.25 50 576P 720X576 15.625 50 576i NOTE Specifications and design are subject to change without notice.
ACCESSORIES Please check the following accessories.
