User manual

PICTURE

LET'S START

INDICATOR

STANDBY

After the unit has been suitably placed / fixed, on the desk or on your car, and all cords are

connected for power, input and output .

If your unit is not fixed with the battery pack, connect the adapter to the LCD TV, the unit will

go into standby mode, and you can see the indicator get into red.

If your unit is fixed with the battery pack, and the quantity of electricity is high enough, the

unit will go to standby mode, indicator turn red. If not, please check the battery pack or contact

authorized service department.

CHANGE SOURCE OPERATION

You can change the input source from the source menu. Press [SOURCE] button on unit or

[SOURCE] key on remote control to show the menu on screen.

The current source item is highlighted. Press [ ] buttons on the remote control, or [CH+/

CH-] key on the top panel of LCD TV to select your desired mode. Press the [ ] or [OK]

button to confirm your choice .

STANDBY

DVD

DVB

What you should do next is, press the STANDBY key on the top panel of the TV, or [STANDBY]

button on the remote control to make the unit switch to power-on mode then you will see the

LED indicator turn green. Now you can enjoy the many features of your new product.