User manual

USAGE OF USB DEVICE AND 3 -IN-1 CARD READER

2. Play 3-in-1 CARD READER

USB jack

MEDIA CARD socket

CARD READER AND USB OPERATION

USB refers to Universal Serial Bus. Most of USB devices on the market are USB1.1 or USB2.0.

Here are some common types of USB 1.1 devices:

Monitors, Communication devices, Audio Human Input Device(HID), Mass storage drives etc.

Most flash memory ,USB HDD etc. belongs to Mass Storage Class. Mass Storage

Class includes 2 transport manners:

1. USB 1.1 Mass Storage Class Control/Bulk/Interrupt (CBI) Transport

2. USB 1.1 Mass Storage Class Bulk-Only Transport

This unit supports USB 1.1 Mass Storage Class Bulk-Only Transport.

When using USB 1.1 Mass Storage Class Bulk-Only Transport devices, please notice that

the file operation system only supports Windows FAT ,not support FAT32 and NTFS etc file

system.

The 3-in-1 card reader of this player can read SD Card (Secure Digital Card), MMC Card

(Multi Media Card) MS Card (Memory Stick Card).

Important: Before you use the USB or card reader function, you should

change the input source of the TV to DVD and press [CARD/DISK] button.

1. Using USB devices:

Please insert USB devices into the USB jack of this unit then press [CARD/DISK] button .

After correctly reading USB devices , the screen will display an operation menu.

Please refer to the part of "MPEG4 and JPEG FILE PLAYBACK" in page 25 for details.

In DVD mode, press [CARD/DISK] button, the TV set will to detect and read card.

If there are supported card in the card port ,after reading card data correctly, an operation

menu will be displayed on the screen.

If you want to switch to DVD state, please press [CARD/DISK] button to exit USB

and card read state.

RATIO

CARD/DISK DVD MENU

DOWN

PLAY

CARD/DISK