User manual

Figure 1:

Take the backboard and 4 screws from accessories, and lie the host machine flat,

with bottom casing facing upwards. According to the direction shown in the figure,

make the 4 screw holes in the backboard aim at the 4 in the bottom casing of the

host machine, and then use 4 screws to fix the backboard onto the bottom casing

of the host machine (shown in the figure 1).

host machine

backboard

Figure 2:

Take out the headrest bracket from accessories, rip off the magic band firstly,

and then make the face with sponge alongside the headrest of the car seat,

and the end with clasp plate face upwards; then bind the magic band on the

headrest of car seat (shown in figure 2); finally check whether the headrest

bracket becomes loose.

clasp plate

headrest bracket

car seat

INSTALLATION

HEADREST BRACKET INSTALLATION

When installing the host machine with backboard onto the headrest bracket, take

hold of the host machine with two hands, make the left and right clasp slots of the

host machine aim at those of the headrest bracket vertically and slide downwards

until a click sound is heard. Now you still need to uplift it upwards to check whether

it is loose, if not, it means that the installation is proper and full.