User manual

BATTERY PACK
1. Installing battery pack
Place this unit to the center of the back, then slide the battery pack to secure it as the
direction (figure ).
When the battery pack is power on, the orange indicator will flash for about 1 second,
indicating that the whole charging system is powered on .
After entering charging process, the red indicator is always on, which means that the
battery pack is being charged.
BATTERY PACK INSTALLATION
4
1
Please use the adapter provided, connect to the DC IN socket of the battery pack to
charge it (figure ). When the battery is on the TV, you also can charge it while LCD
TV is working (figure ).
3
4. Recharging battery pack
2
3. Remove battery pack
Push the battery pack as the direction shown in figure , then take it out.
3
4
2
2. Use battery
If the battery is full, you can use this LCD TV freely.
If the battery pack is installed correctly, the indicator on the TV will turn red. If not, please
check whether the battery is full or be installed correctly.
When the voltage of the battery is lower than 5.8V, the TV set will turn off automatically.
You have to charge the battery to make it work again.
When use the battery pack, it may feels a bit warm, that's OK.
Button
1
4
If the battery pack is on the LCD TV, whether the TV is in STANDBY mode or POWER
ON mode, it can charge the battery. In POWER ON mode, a battery sign will be
displayed on the screen to say the battery is being charged.
" "
Indicator