TFT-LCD TV W153D USER MANUAL READ CAREFULLY BEFORE OPERATION W153D
IMPORTANT SAFETY INSTRUCTIONS TO PREVENT ELECTRICAL SHOCK. CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN. DO NOT REMOVE THIS COVER. NO USER- SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol indicates dangerous voltage inside the product that presents a risk of electric shock or personal injury. This symbol indicates important instructions accompanying the product. Please read this manual carefully before using this product.
IMPORTANT SAFETY INSTRUCTIONS Do not clean the front with keton-type materials (e.g.Acetone ),ethyl alcohol, toluene, ethy lacid, methyl, or chloride-these may damage the panel. Locate your DC adapter near an easily accessible AC outlet. If your LCD TV does not operate normally in particular, if there are any unusual sounds or smells coming from it unplug it immediately and contact an authorized dealer or service center. High temperature can cause problems.
CONTENT INSTALLATION Normal installation 1 PANEL BUTTON FUNCTIONS Panel control 2 Rear panel 3 Battery installation 7 EXTERNAL EQUIPMENT Connecting diagram 4 REMOTE CONTROL HANDSET Remote buttons 5 LET'S START Changing source operation 8 TV MENU SETUP Picture TV setup 9 12 Function 15 Sound 11 OSD setup 14 TELETEXT FUNCTION Teletext function 16 AV, SCART and YPBPR SETUP Video setting menu 17 VGA SETUP Picture 18 Sound 19 Monitor setup 20 OSD setup 21 Function 22 DVD OPERA
CONTENT DVD OPERATION VCD, SVCD menu playback 28 PBC playback 29 Direct play 30 Memory 30 Select track to play directly by number buttons 30 Select language/audio 30 Repeat playback 31 Repeat playback of selected segment 32 Fast playback 32 Play from the desired position 33 Zooming the displayed frame 34 MPEG4 and JPEG file playing 34 Headphone enjoying 36 CARD READER AND USB OPERATION Usage of USB equipment 37 DVD FUNCTION SETUP General setup 39 Audio setup 39 Video setup 4
INSTALLATION NORMAL INSTALLATION C A B Hook Ostium M4 10 Screw 1pcs Kickstand Rear viewing of LCD TV 1, Hook the tache (labeled A)of the kickstand onto the plate (labeled C). 2, Tighten the screws ( M4 10) through the ostium (labeled B). 3, Figure 1 shows the finished installation. The kickstand can rotate 15 -degree.
PANEL BUTTON FUNCTIONS PANEL CONTROL 10 11 12 13 14 3 4 5 6 7 15 8 9 1 2 Front panel 1 IR sensor window 2 Indicator( Indicator is red when in standby mode, green when working normally. ) Left panel 3 SETUP (Enter or exit setup menu) 4 VOL+/-(Increase or decrease volume) 5 CH+/- (Increase or decrease channel number) 6 SOURCE (Enter to exit source menu) 7 STANDBY (To switch between standby mode and power-on mode) 8 Headphone jack 9 POWER(Turns on or off the power supply).
PANEL BUTTON FUNCTIONS REAR PANEL 8 7 COAXIAL VIDEO 6 1 2 5 3 4 SCART SCART input terminal 1 YPbPr or YCbCr input terminal 5 2 VGA input terminal 6 Composite video/audio input 3 PC audio input 7 Coaxial digital audio output 4 12V DC input terminal 8 RF input terminal 3
EXTERNAL EQUIPMENT CONNECTING DIAGRAM COAXIAL VIDEO SCART R F cable L R DVD or VCR player Power amplifier (with coaxial digital audio in) NOTE You should connect the interconnecting cables BEFORE plugging in the power cord.
REMOTE CONTROLLER REMOTE BUTTONS 1 EJECT Disc in/out in DVD. [ ] button To play normally or pause playing in DVD . 2 1 2 3 3 [ ] button To fast-forwards DVD playback in DVD . 4 4 [ ] button To select the next chapter or track in DVD. 5 5 Number button To select program number. 0 6 6 TUNE 7 RETURN To exchange channel between the previous program and the current program in TV/DTV . 7 TUNE/AQT Long press(more than 3 seconds) the button to start auto scan in TV/DTV.
REMOTE CONTROLLER 22 STANDBY To switch between standby mode and poweron mode. 23 [ ] button To fast backward playback in DVD. 24 [ ] button To select the previous chapter or track in DVD. 25 [ ] button To stop playing in DVD . 22 23 26 TWO-DIGIT NUMBER BUTTON To switch between one or two-digit program number. 27 SOURCE To select input source: ANALOGUE TV, DIGITAL TV, DVD, AV, SCART, YPB P R and VGA. 28 UP/DOWN cursor To select upward/downward in the menu or change the channel in TV/DTV .
REMOTE CONTROLLER BATTERY INSTALLATION Remove the battery cover. Insert two SUM-4(AAA) batteries matching the -/+ polarities of the battery to the -/+ marks inside the battery compartment, as in the following figure: BATTERY LIFE Generally speaking, the battery may be used for one year, but the battery life is also related to the usage times and remote controller operation. If the remote controller is still not operating when very near to the remote sensor window, please replace the battery.
LET'S START After this unit is well fixed on the desk or on the wall, and the cords are well connected for input and output, what you should do next is: Firstly, connect the adapter to the LCD TV, and turn on the power switch then the unit will go into standby mode, you can see the indicator turn red. Secondly, press [STANDBY] key on the left side of the LCD TV or [STANDBY] button on the remote control to make the unit switch into working mode, and you will see the indicator turns green.
TV MENU SETUP This product can store up to 100-channel programs (0 99). In TV, press [SETUP] button and the setup menu will show as follows: Pressing [ ] button on the remote control, you can select setup menu sections (setup PICTURE menu consists of " PICTURE " , " SOUND " , " TV SETUP ", " OSD SETUP", " FUNCTION ") . Press [ ] or [OK] button to enter this menu section. Press [ ] button on the remote control to select the item, and then press [ ] button to adjust parameters.
TV MENU SETUP NOTE Select "BRIGHTNESS " to adjust it, the sub item will show as follows : press [ ] button to adjust the value of brightness. BRIGHTNESS 50 " CONTRAST " , " TINT " , " SHARPNESS " , " SATURATION " are as the same. If you have adjusted the upper items not at " USER " mode, the adjusted value will automatically overlay the " USER " mode parameters.
TV MENU SETUP SOUND Select " "and menu will show as follows: SOUND SOUND MODE USER BALANCE 50 BASS 50 50 TREBLE NICAM SELECT MONO OK ENTER SETUP RETURN Press [ ] button to select different items and press [ following are the descriptions of the sound item. Item ] button to adjust them. The Description SOUND MODE Can be changed between " USER " , "MUSIC" , " FILM " and "NEWS" . BALANCE To adjust balance of left and right sound channels. BASS To adjust bass. TREBLE To adjust treble.
TV MENU SETUP TV SETUP Select " " and TV setup menu will show as follows: TV SETUP CHANNEL 1 COLOR SYSTEM SOUND SYSTEM FINE TUNING AUTO AUTO 40.00MHZ MANUAL SEARCH AUTO SEARCH CHANNEL EDIT SELECT Press [ OK ENTER SETUP RETURN ] button to select different items and press [ ] button to adjust them. Description Item CHANNEL To change the channel number. COLOR SYSTEM Can be changed between: "AUTO ", "PAL " and " SECAM ".
TV MENU SETUP Select "AUTO SEARCH " , the searching menu will show as follows: AUTO SEARCH 1 2 VHF L 3 2 112.25MHZ PRESS SETUP TO EXIT 1 The number of programs have been found. 2 The current searching frequency. The current searching frequency Band, 3 Bands in total: "VHF L" ,"VHF H"," UHF". 3 Select "CHANNEL EDIT " , the menu will show as follows: CHANNEL EDIT 5 CHANNEL NO SKIP __ SWAP SAVE SELECT Item ? ADJUST SETUP RETURN Description CHANNEL To select current channel here.
TV MENU SETUP OSD SETUP You can adjust the relative parameters of OSD itself here. Select " " item and OSD SETUP menu will show as follows: OSD SETUP ENGLISH LANGUAGE OSD H-POSITION 50 OSD V-POSITION 50 OSD DURATION 25 TRANSPARENCY 25 SELECT Press [ OK ENTER SETUP RETURN ] button to select different items and press [ Item ] button to adjust them. Description LANGUAGE Set OSD language. OSD H-POSITON To adjust OSD horizontal position. OSD V-POSITON To adjust OSD vertical position.
TV MENU SETUP FUNCTION Select " " item and FUNCTION menu will show as follows: FUNCTION FULL ASPECT RATIO NOISE REDUCE MID SLEEP OFF OFF FM TRANSMIT TRANSMIT FREQ 93 MHz RESET SELECT Press [ OK ENTER SETUP RETURN ] button to select different items and press [ Item ] button to adjust them. Description ASPECT RATIO To switch the video format between "FULL" ,"ZOOM", " NORMAL" and "PANORAMA". NOISE REDUCE To reduce the noise of the image. SLEEP To set the sleep time.
TELETEXT FUNCTION Most TV stations provide cost-free teletext information, including the latest news, weather information, TV program list and stock information, etc. You just input the needed teletext page according to the teletext content. TELETEXT DISPLAY Select the channel with teletext signal; Press [TEXT] button; Select the corresponding page according to the colorized buttons on the remote control; Press [TEXT] again and TV screen will display.
AV ,SCART and YPBPR SETUP VIDEO SETTING MENU The menu setup of AV/SCART /YPBPR modes is much the same as that of TV mode, except the " " section is invalid and a bit difference in sound mode. It is not repeated here. You can find it in preceding pages.
VGA SETUP With the VGA mode supported up to 1024*768@75Hz, and speakers built in, you can use this unit as a multimedia PC monitor. When this unit works in VGA mode, the following setup can be done. Press [SETUP] button to enter main section. Press [ press [ ] button or [OK] button to enter. ] button to select sections and then PICTURE Press [ ] button to select " ", and press [ /OK] button to enter.
VGA SETUP Here shows the color temperature sub menu. COLOR TEMPERATION MODE Press [ NORMAL RED 50 GREEN 50 BLUE 50 ] button to select item and press [ ] button to adjust the value of the item. Description Item MODE Select color temperature mode :"USER", "NORMAL", "WARM" and "COOL". RED Adjust red gain value of color temperature. GREEN Adjust green gain value of color temperature. BLUE Adjust blue gain value of color temperature. NOTE: The adjust value will be stored in " USER " mode.
VGA SETUP MONITOR SETUP Press [ ] button to select " " and press [ /OK] button to enter. MONITOR SETUP H - POSITION 50 V - POSITION 50 FREQUENCY 100 PHASE SELECT 50 OK ENTER SETUP RETURN Description Item H - POSITION To adjust screen horizontal position. V - POSITION To adjust screen vertical position. FREQUENCY To adjust frequency. PHASE To adjust phase.
VGA SETUP OSD SETUP Press [ ] button to select " " and press [ /OK] button to enter. OSD SETUP ENGLISH LANGUAGE OSD H-POSITION 50 OSD V-POSITION 50 OSD DURATION 25 TRANSPARENCY 25 SELECT Press [ OK ENTER SETUP RETURN ] button to select different items and press [ Item ] button to adjust . Description LANGUAGE Select OSD language. OSD H-POSITION To adjust OSD horizontal position. OSD V-POSITION To adjust OSD vertical position.
VGA SETUP FUNCTION Press [ ] button to select " ", and press [ /OK] button to enter. FUNCTION FULL ASPECT RATIO NOISE REDUCE MID SLEEP OFF FM TRANSMIT OFF TRANSMIT FREQ 93 Mhz RESET SELECT Press [ OK ENTER SETUP ] button to select different items and press [ RETURN ] button to adjust . Description Item ASPECT RATIO To switch the video format between "FULL" ,"CENTER". NOISE REDUCE Invalid in VGA. SLEEP To set the sleep time.
24
DVD OPERATION Compatible Disc Types Types DIGITAL VIDEO Sizes Recorded Contents 12cm CD-DA 12cm VIDEO CD Compressed digital audio+compressed digital video (dynamic picture) 12cm SVCD: Compressed digital audio+compressed digital video (dynamic picture) 12cm DVD: Compressed digital audio+compressed digital video (dynamic picture) Digital audio NOTES Issues related to DVD SVCD MPEG4 VCD CD These icons on the top banner indicate the disc types that the function described in this section appl
DVD OPERATION PLAY/PAUSE PLAYBACK DVD MPEG4 1. Press [ SVCD VCD CD ] button in playback status. Press [ ] button once to pause playback, display on TV screen: 2. To restore playback, press the [ ] button.
DVD OPERATION 1. Press [MENU] button to display menu on TV screen for selection, operate according to the hint of menu and press number buttons to select. PLAY ROOT MENU 1. ........ 2. ........ 3. ........ Number 2. Press cursor button to select track you desired, then press [ ] button or [OK] button. 1 2 3 4 5 6 7 8 9 0 OK Cursor NOTE Press [MENU] button to return to initial menu. The return location varies with discs. MENU VCD, SVCD MENU PLAYBACK SVCD VCD When playing SVCD, VCD2.
DVD OPERATION PBC PLAYBACK SVCD VCD Enjoy PBC alternate function when playing Super VCD, VCD2.0 disc with PBC function, For example:playVCD2.0 disc. 1. Main menu displays on TV screen A: 1. ........ 2. ........ Press number button to select. For example: select main menu 1. The TV screen as show in B: 1. ........ 2. ........ 2. Submenu displays on TV screen after enter into main menu 1. 1. ........ 2. ........ 3. ........ 4. ........ 5. ........ 3. Press[ ] or [ ] button to turn to adjacent page.
DVD OPERATION MEMORY DVD 1. This player can save the currently played time point automatically when you leave the current DVD disc playback (switch from DVD signal source to other signal source, enter standby state in DVD mode). 2. When switching to DVD playback state again, this player can automatically search the time point saved last time to continue playing. If you want to play from the beginning, please press [ ] button twice and then press [ ] button.
DVD OPERATION DVD disc: Audio 1/2 Chinese Audio 2/2 French As for VCD, SVCD or CD disc with multiple channels, you may select audio output from left or right channel or select stereo audio output. For VCD disc, left channel records dubbing and right channel records singing, and you may select left channel for dubbing. VCD, SVCD, CD disc: Mono Left Mono Right Stereo Mix-Mono LANGUAGE NOTE Language type varies with disc recording.
DVD OPERATION REPEAT PLAYBACK OF SELECTED SEGMENT DVD MPEG4 SVCD VCD CD When playing disc, you may press [A-B] button to play your desired segment content repeatedly. 1. In normal playback, press [A-B] button at the beginning point (point A) of the segment that you desire to play repeatedly. TV screen displays: A 2. In normal playback, press [A-B] button at the ending point (point B) of the segment that you desire to play repeatedly.
DVD OPERATION PLAY FROM THE DESIRED POSITION DVD MPEG4 SVCD VCD CD Play DVD disc Inputting a certain time, title number or chapter number directly may search in the disc fast and then play forward from this position. 1. Search title and chapter. For instance, search the 2nd chapter in title 6.
DVD OPERATION 3. Select the track Press [GOTO] button until TV screen displays the following figure. Press number buttons to input track. Select Track -- /15 GOTO ZOOMING THE DISPLAYED FRAME DVD MPEG4 SVCD VCD Zoom in/out the player frame. 1. When playing a disc, press the [ZOOM] button can open the zoom in/out function, and the TV screen displays( take X2 mode as an example): The frame is magnified to 2 times of the normal size. 2.
DVD OPERATION 1 00:00 00:00 004/369 \PIC\ 2 2 .. 3 Du000 Du001 4 Du002 5 State window 4 Display the current state information. 1 DIR window 5 Display the current path. 3 6 Scroll bar window Indicate the current file's position. Preview window JPEG image preview. File window Information window 6 Display the current path's file. Display the current operation prompts.
DVD OPERATION Other basic operation methods 1. Press [ ],[ ] button may turn to the next or last page. Other functions of JPEG file 1. When playing JPEG file, pressing [ ] button will achieve preview playback function. At the same time, all JPEG files are displayed on TV screen. One page can display up to 12 pictures at most. The remaining ones are shown on the next page. Pressing [ ] button will enter the next page and [ ] button will enter the previous page.
CARD READER AND USB OPERATION USAGE OF USB DEVICE AND 3 -IN-1 CARD READER USB refers to Universal Serial Bus. Most of USB devices on the market are USB1.1 or USB2.0. Here are some common types of USB 1.1 devices: Monitors, Communication devices, Audio Human Input Device(HID), Mass storage drives etc. Most flash memory, USB HDD etc. belongs to Mass Storage Class. Mass Storage Class includes 2 transport manners: 1. USB 1.1 Mass Storage Class Control/Bulk/Interrupt (CBI) Transport 2. USB 1.
CARD READER AND USB OPERATION NOTES This player can play USB devices and MPEG4 and JPEG files in SD, MMC and MS cards. When reading MPEG files with large size in USB device or media card, pause may appear. If there is no files in USB devices or media card , on-screen appears "Empty Device". If USB devices or media card have a problem, or the operation is incorrect, the screen displays "Device Error". Please check USB device or media card, or else unplug them then insert them again.
DVD FUNCTION SETUP Turn on this TV, press [SOURCE] button to change source to DVD, press [SETUP] button, then press [ ] button to choose DVD item, the DVD setup menu will be displayed as follow: GENERAL SETUP General Setup Page TV Display OSD Lang Screen Saver Last Memory Wide ENG On On Go To General Setup Page 1. TV Display: This item is used to set the output picture ratio of this unit. Optional settings: Normal/PS, Normal/LB, Wide, Wide Squeeze; Default: Wide. 2.
DVD FUNCTION SETUP SPDIF Setup Page SPDIF Output RAW LPCM Out 48K SPDIF/RAW SPDIF/PCM Setup SPDIF SPDIF output: This item is used to set the bit stream type of the digital output. Optional settings: SPDIF/RAW, SPDIF/PCM; Default: SPDIF/RAW LPCM output: This item is used to set the output frequency of LPCM audio data to fit for different power amplifiers. Optional settings: 48K, 96K; Default: 48K. NOTE: Only when the SPDIF output is set the SPDIF/PCM, the frequency of LPCM audio data is optional. 3.
DVD FUNCTION SETUP VIDEO SETUP Video Quality Setup Sharpness Brightness Contrast Gamma Hue Saturation Med 00 00 None 00 00 Go To Video Setup Page 1. Sharpness: This item is used to set the sharpness of video outputs. Optional settings: High, Medium, Low; Default: Med. 2. Brightness: This item is used to set the brightness of video outputs. 3. Contrast: This item is used to set the contrast of video outputs. 4. Gamma: This item is used to set the color temperature of video output.
DVD FUNCTION SETUP NOTE Audio, subtitle and disc menu language are only effective in DVD mode. If the disc is not recorded with the language you appointed, the unit will apply the language that the disc appointed to play. Select other languages: press [ ] button to move cursor to "OTHER" item, press [OK] button and then number buttons to input the language code you desired. After input finishes, press [OK] button again. 6.
DTV MENU OPERATION Press the [DTV SETUP] button, then the Main Menu will be displayed, you can set your preferences in that, such as search channels, edit the channel list or your favorite list , view Programme Guide Information. It is easy to see that the Main Menu is composed of six parts: General Setting, Channel Install, Channel Manage, Advanced Channel , EPG, System Info.
DTV MENU OPERATION Channel Search You can set the search mode as new or add . Channell Search Then press [ OK ] button to confirm it. Installation type Note: If the mode is new, will delete the old channel the current frequency. If the mode is add, do not delete the old channel the current frequency. New OK SETUP EXIT Manual Search Manual Search Select the Chanel item you can select the frequency by the [ ] or [ ] button. Channel 21 Frequency 474.
DTV MENU OPERATION CHANNEL MANAGE Channel Manage Create a favourite list The Favorite lists menu allows you to create, modify and delete your own favorite lists but not the two default service lists (TV, Radio). Four TV favorite lists and four radio favorite lists can be created. Modeify a favourite list Delete a favourite list OK SETUP EXIT Cerate a favourite list Cerate a favourite list This screen allows you to create a new favorite channels list with selection criteria.
DTV MENU OPERATION Default TV/Radio lists On these lists, only the " Lock/unlock " option is available: a press on the [RED] button will lock the highlighted channel if unlock and vice-versa (toggle behavior). TV/Radio favourite lists For all these lists, a few actions are available: Add/Skip: Toggle behavior on the [GREEN] button, in front of the channel list a color icon indicates the status (white for skipped, blue for added).
DTV MENU OPERATION ADVANCED SETTING The parental control item allows you to enable or disable the locking management. Advanced Setting Parental control Disabled Channel lock No Maturity level No PIN change OK SETUP EXIT Parental Control If the parental control item is disabled then all the locking are deactivated, If it is enabled then all the locking are applied according to your choice.
DTV MENU OPERATION ELECTRONIC PROGRAM GUIDE (EPG) By pressing the Guide button, an Electronic Program Guide is displayed. The EPG supplies information, such as program lists, start and end times of all available channels. In addition, In addition, the detailed information about the program is often available in he EPG. (The availability and the amount of program details will vary depending on the broadcaster.
DTV MENU OPERATION Factory Settings This acknowledge pop-up allows you to erase all the custom parameters. If it is confirmed, all services lists and user preferences are deleted and the DTV restarts as for a " First Time installation " . All private settings and other user data will bu erased.
DTV MENU OPERATION and changes the selected channel accordingly. Zapping can also be done by entering channel number using digit keys. TV The channel list is displayed and is automatically 1 BBC ONE Wales removed from the screen after few seconds. 2 BBC 2W The screen bellow corresponds to the TV list. 7 BBC THREE 79 CBBC Channel You can toggle from TV lists to Radio lists using the 80 BBC NEWS 24 ] button and between different TV lists using [ 105 BBCI 800 Teletx.german [FAVORITE] button.
TROUBLESHOOTING Please check for causes of problems in accordance with the following chart before contacting maintenance personnel.
TROUBLESHOOTING DVD TROUBLESHOOTING Causes Symptom Correction Not play 1. Condensation on laser head 2. Disc not properly loaded 3. Disc not compatible with the unit 1. Switch on power and wait for 1 to 2 hours 2. Make sure label side of the disc facing up 3. Confirm whether this unit is compatible with the placed disc 1. Too large volume of connected device 2. Sound field mode not suitable for disc 1. Adjust the device volume Sound distortion No sound No image No color 2.
VGA SCART YPBPR FM Power Normal Standby mode Less than Input connector Frequency range (VHF/UHF) Channel range(VHF/UHF) DVB IEC-Type, IEC 169-2, Female 174MHz ~ 858MHz 7 & 8 Mhz W H D Because of disc quality and format differences we cannot assure the unit will read all. Some functions cannot utilized on some discs, but this is not a fault with the machine.
DISPLAY MODE SUPPORTED PC INPUT MODE Resolution Hor scanning frequency Ver scanning frequency (KHz) (Hz ) Pixel frequency (MHz) Format 640 350 31.5 70.0 25.17 DOS 720 400 31.5 70.0 28.32 DOS 640 480 31.5 60.0 25.18 DOS 640 480 37.9 72.0 31.50 VESA 640 480 37.5 75.0 31.50 VESA 800 600 35.1 56.2 36.00 VESA 800 600 37.9 60.0 40.00 VESA 800 600 48.1 72.0 50.00 VESA 800 600 46.9 75.0 49.50 VESA 1024 768 48.4 60.0 65.00 VESA 1024 768 56.5 70.11 75.
DISPLAY MODE SUPPORTED VIDEO INPUT MODE Format Hor scanning frequency ( KHZ) Ver scanning frequency (HZ) Vert scan type 720X480 31.5 60 480P 720X480 15.6 60 480i 720X576 31.2 50 576P 720X576 15.6 50 576i NOTE Specifications and designs are subject to change without notice.
ACCESSORIES Please check the following accessories. Operational Manual 9 6 3 5 2 8 0 4 1 7 User manual Remote control and battery Power adapter Kickstand Kit ** ** Wall Mount Holder Kit (optional) AV cord Automotive Power socket adapter 5196136 V0.
