User Guide

Operating Instructions
3
EDID Introduction:
00: Mixed EDID: always follow the lowest resolution
of the displays connected to output 2 in order to support all displays show the source.
11: Copy EDID: output 1 is prior port
a. When output 1 is connected to one display, another display which connected to
output 2 will follow the Resolution of output 1.
b. When output 1 is disconnected, output 2 will output 1080p only.
10: Default 1080p output: output a default 1080p source, in this case all outputs will
display 1080p if they support resolution 1080p and above.
01: Default 4Kx2K output: output a default 4Kx2K source,
in this case all outputs will
display 4Kx2K if they support resolution 4Kx2K and above.
Please restart the splitter when change EDID mode!
Connecting and operating
1) Connect the HDMI input source to input port of HDMI splitter.
2) Connect the HDMI splitter output ports to the displays.
3) Power up splitter, source and displays.
Connection Diagram
4K TV1 4K TV2
PS3,Blu-ray DVD player, etc.
HDMI Source
HDMI cable
HDMI cableHDMI cable