User Manual
Table Of Contents
- 1 .Safety information
- 2. IP Camera Tester Introduction
- 3. Operation
- 3.1 Installing the Battery
- 3.2 Instrument connection
- 3.2.1 IP camera connection
- 3.2.2 Analog camera connection
- 3.3 OSD menu
- 3.3.1 Lite mode
- 3.3.2 Drop-down Menu
- 3.3.3 Screen capture
- 3.3.4 TesterPlay
- 3.3.5 Rapid video
- 3.3.6 IP discovery
- 3.3.7 Rapid ONVIF test
- 3.3.8 IP camera test
- 3.3.9 Video monitor test
- 3.3.10 CVI camera test
- 3.3.11 TVI camera test
- 3.3.12 AHD camera test
- 3.3.13 Network tool
- （1）IP address scan
- （2）PING Test
- （3）Network test (Ethernet bandwidth test)
- （4）Port Flashing
- （5）DHCP server
- （6）Trace route
- （7）Link monitor
- 3.3.14 Rapid IP Discovery
- 3.3.15 PoE power / DC12V 3A power output
- 3.3.16 Audio Record
- 3.3.17 Data monitor
- 3.3.18 Audio player
- 3.3.19 Media Player
- 3.3.20 RTSP Player
- 3.3.21 Hik test tool
- 3.3.22 Dahua test tool
- 3.3.23 Update
- 3.3.24 Office
- 3.3.25 LED Flashlight
- 3.3.26 Browser
- 3.3.27 Notepad:
- 3.3.28 System Setting
- 3.3.29 File explorer
- 3.3.30 Theme
- 3. 4 Audio test
- 3.5 PoE power output
- 3.6 DC12V 3A power output
- 4. Specifications
Page.5.
Bottom interface
3
Video image signal input（BNC interface）/ AHD,CVI and TVI input (BNC interface)
4
Power battery switch
5
Return/Close: Return or cancel while setting parameters of the menu, close or decrease
the aperture
6
Confirm key (Long press it to capture screen interface)
7
Function switching key
8
Press more than 2 seconds, turn on or off the device, short press to turn on or off the
menu display
9
RS485 Interface: RS485communication for the PTZ
10
LED lamp
11
DC12V3A power output, for provisional DC power supply
12
PoE power supply output or LAN test port (Use to test PoE or non-PoE IP camera)
13
DC12V 1A charging interface
14
Audio input
15
Micro SD card moveable, supports up to 32GB